- Joined
- Jan 19, 2005
- Messages
- 4,368
thanks for the Hemco and the fast shipping
Ur50slo
- Thread starter PaCemkr86
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
UR50SLO
The Reaper
- Joined
- Jun 12, 2001
- Messages
- 770
Your welcome!
Glad someone could use it!!!!!!
Hope it helps with your project!
Thanks again,
Scott~
Glad someone could use it!!!!!!
Hope it helps with your project!
Thanks again,
Scott~
- Joined
- Jan 19, 2005
- Messages
- 4,368
any updates on your camaro??
UR50SLO
The Reaper
- Joined
- Jun 12, 2001
- Messages
- 770
I took the engine/trans back out. The converter was too tight. I'm trying to work on a budjet to correct this problem.
So I'm stuck ... well kind of.
I'd love to send the trans to FB Transmissions and have them do the VSC but that's like 2500.00.
I really need a billet crank in the engine and roller cam but that's about the same money.
I think I'm going to have the converter loosend up 500rpm and do a billet stroker crank and roller cam. I should be able to do all that with my budjet and get some more power out of the car along with a good launch.
So... Hopefully I can get it all done here real quick and have it ready for spring.
Thanks!
Scott~
So I'm stuck ... well kind of.
I'd love to send the trans to FB Transmissions and have them do the VSC but that's like 2500.00.
I really need a billet crank in the engine and roller cam but that's about the same money.
I think I'm going to have the converter loosend up 500rpm and do a billet stroker crank and roller cam. I should be able to do all that with my budjet and get some more power out of the car along with a good launch.
So... Hopefully I can get it all done here real quick and have it ready for spring.
Thanks!
Scott~
- Joined
- Jan 19, 2005
- Messages
- 4,368
sounds good. keep us posted
