Wheel fitment help

[1-CLN-GN]

Could somebody tell me if these wheels will fit my GN.Thanks

Front:
19 x 8.5 ET 3
HRE engraved number
2.5” lip

Rear:
19 x 10 ET 5
HRE engraved numbers
Deep 4” lip

 

[GregInAtl]

Sounds right if you are on drop spindles uip front. It'd be somewhere near 4.75 BS.. w/o drop spindles you may need a .5" spacer
on a 10" rear a 4.75 BS will clear as well and fill up the wells.
Ask HRE for BS, it isnt a streamline conversion from ET

 

[BlackMetal]

Sounds right if you are on drop spindles uip front. It'd be somewhere near 4.75 BS.. w/o drop spindles you may need a .5" spacer
on a 10" rear a 4.75 BS will clear as well and fill up the wells.
Ask HRE for BS, it isnt a streamline conversion from ET

Agreed. ET (offset) isn't always a sure way to figure out the backspace, but it allows you to make a decent guess. Knowing the true backspacing numbers would help. But with low offset (3 and 5) they would likely fit.

 

[1-CLN-GN]

Guess there is only one way to find out,going to try them on.At least i have a chance if their not sold yet.Thanks for the replies.