Everything will be shipped from NC. Prices do not include shipping unless noted. All reasonable offers considered. Email me with any questions.
ATR Rods for stock stroke motor. Perfect compliment to an Eagle Crank or Stock Crank. Rods are set up to fully float wristpins. $425 shipped in lower 48.
http://www.v6racing.com/forsale/atr.jpg
http://www.v6racing.com/forsale/atr1.jpg
JE 3.820 Pistons w/ spiral locks to fully float wristpins. $300 shipped in lower 48.
http://www.v6racing.com/forsale/je.jpg
http://www.v6racing.com/forsale/je1.jpg
Water pipe assembly w/ Heater control valve in very good shape with no rust. $75
http://www.v6racing.com/forsale/waterpipe.jpg
Stock valve covers that have been painted with Grey crinkle paint and includes the billet breather in picture. $75
http://www.v6racing.com/forsale/greycover.jpg
Stock Valve Covers in excellent shape that have just been freshly primed and painted in a brush Alum. $100
http://www.v6racing.com/forsale/valvecovers.jpg
http://www.v6racing.com/forsale/valvecovers1.jpg
Rear bumper that is straight. Has a little dent in 1 corner. See photo. Aluminum bumper support. $100 for bumper $65 for Alum Support or $150 for both.
http://www.v6racing.com/forsale/bumper.jpg
http://www.v6racing.com/forsale/bumper1.jpg
AC Delete pulley. Replaces AC compressor while leaving everything in stock location. $35
http://www.v6racing.com/forsale/acpulley.jpg
Accessory bracket that holds PS pump, tensioner, AC compressor, etc. In very good shape. $75
http://www.v6racing.com/forsale/bracket.jpg
Energy Suspension Body bushings. This is brand new set never installed. $100
http://www.v6racing.com/forsale/bodybush.jpg
Stock fuel pump hanger. Rust free and in good shape. Wires may have been trimmed a bit. $90
http://www.v6racing.com/forsale/hanger.jpg
Stock flywheel with 1/3 of a crank still attached. Flywheel has some slight damage and I don’t think the crank is usable at all :biggrin: Make offer
http://www.v6racing.com/forsale/flywheel.jpg
ATR Rods for stock stroke motor. Perfect compliment to an Eagle Crank or Stock Crank. Rods are set up to fully float wristpins. $425 shipped in lower 48.
http://www.v6racing.com/forsale/atr.jpg
http://www.v6racing.com/forsale/atr1.jpg
JE 3.820 Pistons w/ spiral locks to fully float wristpins. $300 shipped in lower 48.
http://www.v6racing.com/forsale/je.jpg
http://www.v6racing.com/forsale/je1.jpg
Water pipe assembly w/ Heater control valve in very good shape with no rust. $75
http://www.v6racing.com/forsale/waterpipe.jpg
Stock valve covers that have been painted with Grey crinkle paint and includes the billet breather in picture. $75
http://www.v6racing.com/forsale/greycover.jpg
Stock Valve Covers in excellent shape that have just been freshly primed and painted in a brush Alum. $100
http://www.v6racing.com/forsale/valvecovers.jpg
http://www.v6racing.com/forsale/valvecovers1.jpg
Rear bumper that is straight. Has a little dent in 1 corner. See photo. Aluminum bumper support. $100 for bumper $65 for Alum Support or $150 for both.
http://www.v6racing.com/forsale/bumper.jpg
http://www.v6racing.com/forsale/bumper1.jpg
AC Delete pulley. Replaces AC compressor while leaving everything in stock location. $35
http://www.v6racing.com/forsale/acpulley.jpg
Accessory bracket that holds PS pump, tensioner, AC compressor, etc. In very good shape. $75
http://www.v6racing.com/forsale/bracket.jpg
Energy Suspension Body bushings. This is brand new set never installed. $100
http://www.v6racing.com/forsale/bodybush.jpg
Stock fuel pump hanger. Rust free and in good shape. Wires may have been trimmed a bit. $90
http://www.v6racing.com/forsale/hanger.jpg
Stock flywheel with 1/3 of a crank still attached. Flywheel has some slight damage and I don’t think the crank is usable at all :biggrin: Make offer
http://www.v6racing.com/forsale/flywheel.jpg