WTB: MSD distributor

[TurboBuRick]

I am looking for a MSD distributor and 6A box. Let me know what you got. Thanks.

 

[DCVING 6]

I am looking for a MSD distributor and 6A box. Let me know what you got. Thanks.

Give Cal Hartline a call, he can get you all set up. Also, you'll have to ask Mike Licht if he has the dizzy working with the MAF PRO yet.

 

[DCVING 6]

http://www.turbobuick.com/forums/stage-ii-tech/197278-distributor-holy-sh-t-thanks-cal-dan.html

 

[Grim]

I am looking for a MSD distributor and 6A box. Let me know what you got. Thanks.

I have a MSD setup for sale.
I have a
MSD pro billet distributor Part# 8551 (New) =$175 +S&H

MSD box 6 BTM Part# 6462 (Used) =$200 +S&H

MSD Blaster SS Coil Part# 8207 (New) =$35 +S&H

If you want it all I will let the whole setup go for $400 shipped continental USA.

 

[TurboBuRick]

Will that box work? I was told by a friend after my post that a 7AL2 is what I need. Whats your thought on this?
I'll take the distributor and the coil for sure. PM me your info.

 

[TurboBuRick]

If your sure that box will work I'll take that too.

 

[Grim]

I don't know why it wouldn't work, it is made for turbo's or supercharger motors only. The 7AL2 is a better box, it does alot more then the one I have. This one gives you the timing retarding control in the dash, has the rev-control and many other things. I can't find all the chips that came wih it. I only have the 6,000 one that is in it now.

It will work but but you may want a box that does more then this one. That is up to you.

 

[Otto J]

There is no reason that box will not work,Withe the correct chip you will not need the boost retard.But that would be nice if you run a race chip than put pump gas in.
The 7AL2 has a higher ouput that the 6 series,But the 6 series if its street car would be a wiser investment

 

[TurboBuRick]

There is no reason that box will not work,Withe the correct chip you will not need the boost retard.But that would be nice if you run a race chip than put pump gas in.
The 7AL2 has a higher ouput that the 6 series,But the 6 series if its street car would be a wiser investment

OK, I'm grabin it. I'm running the MafPro with a pro chip so I can pull timing with that also.
The controler for me is obsolete but the box will work. Sweet deal! :biggrin: