gn87man
Member
- Joined
- Apr 18, 2016
Guys,
I am looking for recommendations for a very good, reputable, reasonably priced engine mechanic in or near Fort Worth. I live on the northwest side of Fort Worth, near Saginaw.
On my 87 GN, I believe a few of my main bearings are bad. Oil pressure is very low (about 5 psi at idle). I can hear the slight bearing grind noise at idle.
Getting lots of knock at only 2000 rpm.
I will need an engine pull, thorough internal engine inspection with appropriate machine work if needed, and new main bearings and rings, at a minimum.
Anyone know of a great, reasonably priced engine mechanic who works on these cars in the Fort Worth, Texas area?
I sure would appreciate any recommendations.
Thank you all so much in advance.
I am looking for recommendations for a very good, reputable, reasonably priced engine mechanic in or near Fort Worth. I live on the northwest side of Fort Worth, near Saginaw.
On my 87 GN, I believe a few of my main bearings are bad. Oil pressure is very low (about 5 psi at idle). I can hear the slight bearing grind noise at idle.
Getting lots of knock at only 2000 rpm.
I will need an engine pull, thorough internal engine inspection with appropriate machine work if needed, and new main bearings and rings, at a minimum.
Anyone know of a great, reasonably priced engine mechanic who works on these cars in the Fort Worth, Texas area?
I sure would appreciate any recommendations.
Thank you all so much in advance.