Search results

Sweet!!!!

Sent you a pm about some parts you have.

Bryan it is a 247" 109 with ported iron heads from kip asplund. limmit gtq-70 224-224 roller and a big fmic from cottons. Thanks to kip/jack and everyone else that has helped get this thing on track. There is a lot more to it but that is the basic combo.

Went to the track this weekend and ran a 10.12 off the trailer. Next pass was a 9.99 @ 134 The last pass was a 9.98 @ 135.5 6.38 @ 110.0 1.52 60' I think it is time for some new slicks!!! Without the wideband input for the max-e i would be putting the car away for the year without a 9...

Shari sent you a pm

I instaled the max effort and stock computer out of my car in the gn i am working on and all is good. So now it is down to the jumper harness or the ecu.

I have tried a known good module and esc module. I also checked crank to run in system config. and it was not to high. I just dont know what pins to ohm to check the esc wire.

With a timing light i am getting 8 degrees of timing at idle. And it stays there when the rpms are brought up to 2000. If it idles for more then about 10 min. the headers will glow orange.

Go to www.lenzauto.com They have about 500 used trucks on the lot. And they are in wi.

BFH can make a new face plate for the boost controller. I saw one at bg and it was nice.

Lee i am interested in the trailer. What color is it. Cant really tell in the pic. I will give you a call.

schaeffer supreme 7000 here www.schaefferoil.com

You have mail

Look up ron tabori in the stage II forum. I am sure he can help you out.

Morocco is a outlaw track and i would say if you run in the friday night street car chaos do so at your own risk. tsm has always been on saturday in the past.

I have seen this done with a small oil galley type plug. You must let motor warm up before you rev the motor or oil filter may burst!!!

When will we be able to use the search feature again.

I ordered the ics titans in dec. and got them in may. They were a 3.850 bore and hung over into the intake side of the combustion chamber. The rtv screen printed seals were also for a stage block and did not cover the water passages for the 109. I talked with caleb at sce a few weeks ago and i...

How fast you want to go. And how fast you end up going may be two different things!!!!!

A roll cage is not something i would be looking for the best deal on. I would be looking for the best fabricator in your aera to do a custom install.