Ok, update,Crank key-way's fine, Balancer hasn't spun, The motor's at 10* where it should be,Compression check was 150-155 across the board. The car will run at 1300rpm if you pedel it, if you don't it'll die,still not on all cylinders... trouble shooting before this was brand new acdelo ign. module/coil pack,crank sensor/splice connector,IAC,TPS,XFI 02,using the same cam sensor with LED (it blinks still). I'm now looking into the XFI going into a by-pass mode? Open to all idea's . Did i slalom to hard an set off the oil presser switch? I had fuel,it was Ignition fail that started all this. My XFI was sent out to F.A.S.T for updating an Cal has programmed some values i needed before this odd fail.