RichieRocket
New Member
- Joined
- Mar 21, 2022
My current cam is a Comp Cam 212/212. I am looking to increase my potential operating RPMs a bit. I am looking to keep as many parts as possible that are already operating properly. This is the cam that I am considering at this point in time. High Energy 218/212 Hydraulic Roller Cam and Lifter Kit Buick Grand National 231 V6
Attached is the current build sheet. I would like to here from any engine builders out there that can look at the current build sheet and offer some seasoned advice on upgrading just enough to get me a few more RPMs and retain the badazz parts currently installed. Of course the push rods will be different, but I’m not trying to put 20k into an already great build.
Attached is the current build sheet. I would like to here from any engine builders out there that can look at the current build sheet and offer some seasoned advice on upgrading just enough to get me a few more RPMs and retain the badazz parts currently installed. Of course the push rods will be different, but I’m not trying to put 20k into an already great build.