Front End Screws-Anybody with a small junkyard lol

[GNICETRY]

I need one of the screws (out of the 3) that hold the side marker light in place. Tiny small ones.

I also need the 2 screws that are on the radiator support that hold the X frame in place in front of the radiator and condenser.

 

[BRAD_PADGETT]

Highwaystars sells the headlight bezel screws

 

[GNICETRY]

They are out of them.
But I need the small screw that holds the side marker light to the bezel (there are 3 of them). The ones that are accessed only by taking the bezel off. No one carries the radiator support screw.

 

[turbobuick]

Try Mike Monte's he sells a bunch of screw kits for G-bodys

 

[BRAD_PADGETT]

They are out of them.
But I need the small screw that holds the side marker light to the bezel (there are 3 of them). The ones that are accessed only by taking the bezel off. No one carries the radiator support sc

Are you looking for Highwaystars "Original Headlight Bezel Screws Part# HLBS-8"?

 

[turbohh]

If you can wait until this weekend, I may have the fasteners you need ... I just need to lay hands on them ...
John A, Turbohh

 

[GNICETRY]

On a side issue I do need the black coated stainless 4 headlight bezels screws. Highway Stars is out of those. But I am looking for 1 of the 3 very small screws that keep the side marker light in the headlight bezel. Also the radiator crossframe screw. I will post pics when I get to the car.

 

[turbohh]

I'm pretty sure I know what you need ... I'll post pics if i lay hands on the pieces ...
John A

 

[BRAD_PADGETT]

On a side issue I do need the black coated stainless 4 headlight bezels screws. Highway Stars is out of those. But I am looking for 1 of the 3 very small screws that keep the side marker light in the headlight bezel. Also the radiator crossframe screw. I will post pics when I get to the car.

Which highway stars part numbers do you need?

 

[GNICETRY]

These

 

[GNICETRY]

Which highway stars part numbers do you need?

This one

 

[BRAD_PADGETT]

This one

I have six of these. How many do you need? PM me.

 

[GNICETRY]

I have six of these. How many do you need? PM me.

PM'ed you

 

[turbohh]

I found the fasteners you need ... See the attached pics ... The bolts for the rad support on my car are 10mm heads and have an attached washer like the ones in the picture. These are off an earlier aluminum G-Body rad support, and were a little rusty. I wire-wheeled them clean, but the gray oxide finish came off, and there's some green paint overspray in places as well. If you need correct finish, you could rattle can them flat black. I know the little screws for the marker lites are correct. I'll send a spare of each of these fasteners in case you lose one (like I would, LOL ...). I also have 4 of the bezel torx-head screws I can spare if needed. Let me know if these will work for you. If so, PM me your shipping address and I'll get these in the mail soonest.
John A, Turbohh

 

[GNICETRY]

I found the fasteners you need ... See the attached pics ... The bolts for the rad support on my car are 10mm heads and have an attached washer like the ones in the picture. These are off an earlier aluminum G-Body rad support, and were a little rusty. I wire-wheeled them clean, but the gray oxide finish came off, and there's some green paint overspray in places as well. If you need correct finish, you could rattle can them flat black. I know the little screws for the marker lites are correct. I'll send a spare of each of these fasteners in case you lose one (like I would, LOL ...). I also have 4 of the bezel torx-head screws I can spare if needed. Let me know if these will work for you. If so, PM me your shipping address and I'll get these in the mail soonest.
John A, Turbohh

View attachment 394489View attachment 394490View attachment 394491View attachment 394492View attachment 394493

I am PM'ing you.

 

[dwall]

I am PM'ing you.

Did you get what you needed? LMK if still needed. I have a pail of OEM fasteners.

 

[GNICETRY]

Did you get what you needed? LMK if still needed. I have a pail of OEM fasteners.

Yes, Turbohh came to the rescue. Thank you anyway.

 

[GNICETRY]

Need the 2 inside the glovebox screws for the console and 2 screws to hold the black plastic covers for the seat frame bolts. Anyone?

 

[dwall]

A picture of each (if you have one) would help me identify them.

 

[GNICETRY]

1st pic I need 2 of the smaller screws. Someone put those long a$$ ones in.
2nd pic the 2 long screws (with washers I believe) that go into the transmission tunnel.