Here is what we have (all prices in CDN dollars, shipping extra):
Location: Toronto, Ontario Canada
Turbo Buick/Grand National Specific:
1) Complete Stock 8445 Heads (unmolested, off low mileage engine) - $100
2) Art Carr (16930) non-L/U torque converter unit rated at 3400-3600rpm - $450
3) Mease Performance Engineering 3" aluminum MAF pipe, elbow and K&N filter - $125
4) Drive shaft loop - a simple home-made unit using the factory strap and HUGE solid U-bend - $15
5) 2 x Turbo Tweak v5.6 chips for alky/propane, 83pph injectors, 3000 stall and a stock MAF - $50/pr
6) 2 x 233 Bosch FPRs - $15
7) No name brand Adjustable FPR - $30
8) Ashtray switch plate w/two momentary switches - (a BuickGN.com product?) engraved with Alky & Transbrake - $20
9) RJC-style manual boost controller - ran 23+psi on the stock WG and 27+psi with the HD WG - $30
10) Bailey Engineering BstC “Boost Controller” w/bleed solenoid - $125
Exhaust:
1) Summit Racing dual exhaust 2.5” header-back kit (P/N 680131) – NIB, complete less mufflers - $175
2) Two (2) Hedman 3”-2.5” ball flange reducers w/O2 sensor bungs (P/N 21143) – NIB - $40
Wheels:
1) Weld Drag Lites – 15x3.5” & 15x8 (w/3.5” BS) – 5x4.75 bolt circle, includes 165R15 & 275/60R15 tires, 20 lugs & washers and 2 centre caps - $850
2) 2002 Z28 Factory “Snowflakes” – four 16x8 wheels (5x4.75” bolt pattern), includes 245/50R16 GSA tires (worn) and 26x10.5 ET Streets (not mounted) and centre caps and a set of 235/50R16 Toyos Proxes - $350
3) Dyna Lite “Crosslace” (GNX style) – four 15x7 light weight 2-piece wheels (5x4.75 bolt pattern), these are currently disassembled for refinishing and will require the work to be completed and new assembly hardware (old fasteners included), rumour has it they are quite rare - $300 - I will include a set of 215/65R15 and 275/60R15 tires for $150 more.
Engines & Parts:
1) Complete TPI 305 Swap – includes - Full ECM and Chassis harnesses, 7730 ECU (Speed Density), Factory in-tank electric fuel pump and hanger assembly, Intake bellow, upper and lower air boxes and K&N drop-in filters, Dual electric fan assembly w/upper and lower brackets, Stock 1991 LB9 shortblock (rated at 9.3:1 Compression (230hp/300ft-lbs)), Fully ported upper, lower and intake runners, Factory distributor (cap, rotor and MSD Blaster coil), Ford Motorsport "19lb/hr" injectors (rated at 22.5lb/hr at 43.5psi), Holley adjustable fuel pressure regulator, Ported throttle body w/air foil & TPS, Fully ported "193" heads (specs below) w/stainless steel 1.94 intake & 1.5 exhaust valves, guide plates, screw-in studs & factory rocker arms, Full CompCams roller valvetrain w/stock TPI computer friendly cam, Hydraulic roller lifters, pushrods & matching valve springs, Factory valve covers; and Extra TPI gaskets - $1499
2) TPI Intake Set-up (MAF based) - upper and lower intakes, runners, fuel rails (no FPR), throttle body, NO hardware included - $100
3) GM Performance Parts LT4 valve springs (P/N 12495494) – NIB - $35
Transmission & Driveline Parts:
1) TransGo Low/Reverse Boost Valve (P/N 7-300) – fits THM 700R4 & 2004R and provides a firmer manual 1-2 shift, holds manual low gear longer, higher speed manual shift back to low - NIB - $10
2) SS/442 200-4R (CZF/CRF etc) Servo cover (P/N 8635692) and piston (P/N 8633563) w/spring, seals & retainer ring - $10
3) Stock GN (w/200-4R) 8.5” driveshaft - $75
Miscellaneous Electronics:
1) MSD/Vortech Universal Boost Timing Master (P/N 5462) w/Ford TFI coil adapter harness (P/N 8874) – NIB - $225
2) APEXi SAFC-II w/extended harness - $175
3) HKS Type 1 Turbo Timer (silver) - $75
Body & Mechanical Parts:
1) Stock 98-02 Camaro Z28 hood (factory black) - $100
2) 2” Cowl induction hood for ‘81-‘88 Monte Carlo (fiberglass, bolt-on, factory black) - $549
3) 1991 Z28 tail lights - one has a hardly noticeable hair line blem/crack - $40
4) 1991 Z28 Hatch Retractor/Closer/Pulldown/Automatic Latch/Power Release - complete assembly worked when removed from car - $100
5) 1991 Z28 Wiper motor - $10
Interior:
1) 1983 Monte Carlo dash plaque and gauge surround – non-SS, maroon in colour - $30
---
Some pictures can be found here: Index of /images/forsale ; additional pictures available upon request.
All parts are open to offers/negotiation/package deals… don’t be shy!
Email michael_lis@whitetrashdesign.ca or call 289-298-5185
Location: Toronto, Ontario Canada
Turbo Buick/Grand National Specific:
1) Complete Stock 8445 Heads (unmolested, off low mileage engine) - $100
2) Art Carr (16930) non-L/U torque converter unit rated at 3400-3600rpm - $450
3) Mease Performance Engineering 3" aluminum MAF pipe, elbow and K&N filter - $125
4) Drive shaft loop - a simple home-made unit using the factory strap and HUGE solid U-bend - $15
5) 2 x Turbo Tweak v5.6 chips for alky/propane, 83pph injectors, 3000 stall and a stock MAF - $50/pr
6) 2 x 233 Bosch FPRs - $15
7) No name brand Adjustable FPR - $30
8) Ashtray switch plate w/two momentary switches - (a BuickGN.com product?) engraved with Alky & Transbrake - $20
9) RJC-style manual boost controller - ran 23+psi on the stock WG and 27+psi with the HD WG - $30
10) Bailey Engineering BstC “Boost Controller” w/bleed solenoid - $125
Exhaust:
1) Summit Racing dual exhaust 2.5” header-back kit (P/N 680131) – NIB, complete less mufflers - $175
2) Two (2) Hedman 3”-2.5” ball flange reducers w/O2 sensor bungs (P/N 21143) – NIB - $40
Wheels:
1) Weld Drag Lites – 15x3.5” & 15x8 (w/3.5” BS) – 5x4.75 bolt circle, includes 165R15 & 275/60R15 tires, 20 lugs & washers and 2 centre caps - $850
2) 2002 Z28 Factory “Snowflakes” – four 16x8 wheels (5x4.75” bolt pattern), includes 245/50R16 GSA tires (worn) and 26x10.5 ET Streets (not mounted) and centre caps and a set of 235/50R16 Toyos Proxes - $350
3) Dyna Lite “Crosslace” (GNX style) – four 15x7 light weight 2-piece wheels (5x4.75 bolt pattern), these are currently disassembled for refinishing and will require the work to be completed and new assembly hardware (old fasteners included), rumour has it they are quite rare - $300 - I will include a set of 215/65R15 and 275/60R15 tires for $150 more.
Engines & Parts:
1) Complete TPI 305 Swap – includes - Full ECM and Chassis harnesses, 7730 ECU (Speed Density), Factory in-tank electric fuel pump and hanger assembly, Intake bellow, upper and lower air boxes and K&N drop-in filters, Dual electric fan assembly w/upper and lower brackets, Stock 1991 LB9 shortblock (rated at 9.3:1 Compression (230hp/300ft-lbs)), Fully ported upper, lower and intake runners, Factory distributor (cap, rotor and MSD Blaster coil), Ford Motorsport "19lb/hr" injectors (rated at 22.5lb/hr at 43.5psi), Holley adjustable fuel pressure regulator, Ported throttle body w/air foil & TPS, Fully ported "193" heads (specs below) w/stainless steel 1.94 intake & 1.5 exhaust valves, guide plates, screw-in studs & factory rocker arms, Full CompCams roller valvetrain w/stock TPI computer friendly cam, Hydraulic roller lifters, pushrods & matching valve springs, Factory valve covers; and Extra TPI gaskets - $1499
2) TPI Intake Set-up (MAF based) - upper and lower intakes, runners, fuel rails (no FPR), throttle body, NO hardware included - $100
3) GM Performance Parts LT4 valve springs (P/N 12495494) – NIB - $35
Transmission & Driveline Parts:
1) TransGo Low/Reverse Boost Valve (P/N 7-300) – fits THM 700R4 & 2004R and provides a firmer manual 1-2 shift, holds manual low gear longer, higher speed manual shift back to low - NIB - $10
2) SS/442 200-4R (CZF/CRF etc) Servo cover (P/N 8635692) and piston (P/N 8633563) w/spring, seals & retainer ring - $10
3) Stock GN (w/200-4R) 8.5” driveshaft - $75
Miscellaneous Electronics:
1) MSD/Vortech Universal Boost Timing Master (P/N 5462) w/Ford TFI coil adapter harness (P/N 8874) – NIB - $225
2) APEXi SAFC-II w/extended harness - $175
3) HKS Type 1 Turbo Timer (silver) - $75
Body & Mechanical Parts:
1) Stock 98-02 Camaro Z28 hood (factory black) - $100
2) 2” Cowl induction hood for ‘81-‘88 Monte Carlo (fiberglass, bolt-on, factory black) - $549
3) 1991 Z28 tail lights - one has a hardly noticeable hair line blem/crack - $40
4) 1991 Z28 Hatch Retractor/Closer/Pulldown/Automatic Latch/Power Release - complete assembly worked when removed from car - $100
5) 1991 Z28 Wiper motor - $10
Interior:
1) 1983 Monte Carlo dash plaque and gauge surround – non-SS, maroon in colour - $30
---
Some pictures can be found here: Index of /images/forsale ; additional pictures available upon request.
All parts are open to offers/negotiation/package deals… don’t be shy!
Email michael_lis@whitetrashdesign.ca or call 289-298-5185