Nicholas Maiers
Member
- Joined
- May 21, 2017
All right guys I’m looking to upgrade my fuel pump I am going to be doing Champion Aluminum heads and intake and may be going to E85 in the future what pump should I do so I won’t have to go bigger later
All right guys I’m looking to upgrade my fuel pump I am going to be doing Champion Aluminum heads and intake and may be going to E85 in the future what pump should I do so I won’t have to go bigger later
All right guys I’m looking to upgrade my fuel pump I am going to be doing Champion Aluminum heads and intake and may be going to E85 in the future what pump should I do so I won’t have to go bigger later
How much power you looking to make?
A DW400 is a better quality piece than a Walbro 450, but both will work. If you start running out of pump, strap a Boost A Pump on there and call it good. Still costs less than a double pumper setup.
I’m hoping for around 500hp
Sent from my iPhone using Tapatalk
I made close to 700rwHP with a single walbro 450 with bigger -8 supply and -6 return line .
That’s correct I forgot about the Boost a pump .so I would say the walbro 450is still good for 600+RWHP on E85You were using a Boost a Pump though. That makes a BIG difference..
more info on the twin 450 set up please?I now have a dual 450 in tank setup . Regardless of what pump u go with you will need to get Teflon fuel lines and you might want to consider pluming in a ethanol analyzer to let you know the ethanol content of the fuel u are running
It is a custom setup I did not something u can just stick in and go .more info on the twin 450 set up please?