TurboTnZ06
Go on red!
- Joined
- May 7, 2002
Follow along as I take out the remaining stock junk and step up to the current century...
Removed: Stock ECM/powerlogger, add-on gauges, add-on senders, coil pack, rail, injectors, engine harness.
Modified: Single -8 feed/-6 return now going to dual feed dual return to relocated Aeromotive FP regulator. Throttle body modified to have 2 1/8 npt vacuum ports, shorten the MSD plug wires.
New: Holley HP EFI, Cruz engine harness, Holley 100 psi oil press sender, Holley 100 psi fuel sender, Holley 3.5 bar map sensor, Holley 120# injectors, Holley smart coils, Cruz fuel rail -8/-6, Cruz 1 inch spacer for air temp, and vacuum ports, vacuum block off plate on top of throttle body.
Here she was before the mods started:
Removed: Stock ECM/powerlogger, add-on gauges, add-on senders, coil pack, rail, injectors, engine harness.
Modified: Single -8 feed/-6 return now going to dual feed dual return to relocated Aeromotive FP regulator. Throttle body modified to have 2 1/8 npt vacuum ports, shorten the MSD plug wires.
New: Holley HP EFI, Cruz engine harness, Holley 100 psi oil press sender, Holley 100 psi fuel sender, Holley 3.5 bar map sensor, Holley 120# injectors, Holley smart coils, Cruz fuel rail -8/-6, Cruz 1 inch spacer for air temp, and vacuum ports, vacuum block off plate on top of throttle body.
Here she was before the mods started:
Last edited: