See attached pic. My afternoon project is to give my fuel pump (hot wired DW301) a good ground. To orient the viewer, the wires in my hand, from the bottom of the photo, are coming from the top of the fuel tank. That must be the fuel pump. Okay, so I want to ground the black wire; the one on the left in my fingers, yes?
I had Nick Micale build my motor, and he installed the FP and hot wire kit. I'm assuming the little black box at the upper right hand corner of the pic is the hot wire kit. Just want to make sure I'm staying away from those wires.
On my way now to get some 10-gauge wire, and some splicer/connector dealies...forget what those are called...to tap into the ground wire.
I had Nick Micale build my motor, and he installed the FP and hot wire kit. I'm assuming the little black box at the upper right hand corner of the pic is the hot wire kit. Just want to make sure I'm staying away from those wires.
On my way now to get some 10-gauge wire, and some splicer/connector dealies...forget what those are called...to tap into the ground wire.