Ssbc rear disc conversion kit from kegs?

[crashedout1]

Getting the kit I have hydroboost set up just wondering if I'm going to have issues?

 

[Reggie West]

The issue with that kit was the bleed valves were right in line with the frame on the car. The first good bump would knock those valves off and the brake lines with it. Don't know if that has changed or not but have a look at it.

 

[crashedout1]

I bought kit 884-a127

 

[crashedout1]

Maybe a shorter bleeder

 

[1986 Buick GX1]

I installed the SSBC kit in '92, I don't know the P/N.
After the second time the tips of the bleed screws broke off I just left them. This was with the stock height Moog cargo coil springs.
I've thought about grinding the nipple flat, but haven't yet. Now that I've installed the UMI 1" lowering springs (stiffer springs) I'll see how it does.

 

[crashedout1]

Use a shorter bleed screw or counter bore the hole on the caliper