highboostgn
Well-Known Member
- Joined
- May 24, 2011
So I have this bet with my father in law(who im deployed with(yea lucky me)) that his 05 Corvette that will have a procharger on it soon, wont be able to take my GN in a race. Now I know from a roll where he can get some traction, Im screwed, but from a dig and me running E/Ts and him having the stock run flats and lack of racing experiance, Im pretty confident I can take it.
His mods are, the procharger, Long tubes, with complete exhaust system. Stock street tires
Mine are 2.5" Dynomax exhaust/no cat, Turbo Tweak 5.7 Alky Chip, Scanmaster, MAF Translator w/ 3" LT1 MAF, Kirban 3" Snubber, 275 E/T Streets, Vacuum Brakes, SMC Alky Kit, "009" Injectors, Walbro 340 pump, FMIC, Racetronix Hotwire Kit, Accufab Adj. Fuel Reg, 160 thermostat, Ported Stock exhaust elbow, and will have a 3" DP by the time of the race
Also if you think the vette will take the GN, list what mods you think I would need to take it down.
********UPDATE*********
So the old guy goes out and puts a cam in..Dynos around 630whp...
So I got my new stage trans in,
9" Art carr converter 2800 Stall
5857 Turbo
RJC DP
at this point my best run was a 12.7 @108 on 15lbs of boost..His was a 12.6 something before the cam with just the supercharger at 581whp.
Im now working on getting installed;
80lb injectors
Pwr Logger with 6.1 chip
Champion Intake
Champion Fuel Rails
72mm TB
Ported Iron heads w/ bigger valves +LT1 springs
218/218 Comp cam, double roller
His mods are, the procharger, Long tubes, with complete exhaust system. Stock street tires
Mine are 2.5" Dynomax exhaust/no cat, Turbo Tweak 5.7 Alky Chip, Scanmaster, MAF Translator w/ 3" LT1 MAF, Kirban 3" Snubber, 275 E/T Streets, Vacuum Brakes, SMC Alky Kit, "009" Injectors, Walbro 340 pump, FMIC, Racetronix Hotwire Kit, Accufab Adj. Fuel Reg, 160 thermostat, Ported Stock exhaust elbow, and will have a 3" DP by the time of the race
Also if you think the vette will take the GN, list what mods you think I would need to take it down.
********UPDATE*********
So the old guy goes out and puts a cam in..Dynos around 630whp...
So I got my new stage trans in,
9" Art carr converter 2800 Stall
5857 Turbo
RJC DP
at this point my best run was a 12.7 @108 on 15lbs of boost..His was a 12.6 something before the cam with just the supercharger at 581whp.
Im now working on getting installed;
80lb injectors
Pwr Logger with 6.1 chip
Champion Intake
Champion Fuel Rails
72mm TB
Ported Iron heads w/ bigger valves +LT1 springs
218/218 Comp cam, double roller