You can type here any text you want

Recent content by AlV

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. A

    THDP Installation

    THDP ttt
  2. A

    Injector O-rings

    Can anyone tell me where to find new injector O-rings? Thanks, AlV
  3. A

    THDP Installation

    I just installed a TH 3" Down pipe in my GN. It seems the shaft that actuates the wastegate puck is longer than the standard one on the stock elbow. Because of this the rod from the waste gate accuatoe is not quite as straight as when installed with the stock elbow. The rod is at an angle...
  4. A

    Trans casing

    Thanks for help Thanks to all the info available on this forum, we were able to get the transmission fixed. We just replaced the governor and the valve body from my old transmission for now and everything seems great. The other valve body had a B&M shift kit and it was not worth figuring out...
  5. A

    Trans casing

    I just recently got a transmission and when it arrived the casing had been cracked in shipment. A local shop took all the guts out of the cracked casing and put it in another 200r4 casing. The other casing was not a BRF gn transmission. Now the transmission shifts between 4,000 and 5,000 rpm at...
  6. A

    Help! Cracked casing

    Thanks Thanks for the info. I got this Tranny to have something to run while I pull my other trans out and get it done. I called a local shop and they said they weld aluminum bellhousings/trans quite a lot. At $68 an hour they said it would probably be done in less than that. This is a high...
  7. A

    Temp gage sender

    Where is the best place to install the sending unit for an electric temperature gage? I can't replace the existing sender right? is there an adapter that will both send infoto the computer and to the gage? Do I install the sending unit that came with the gage in anothe place? I appreciate any...
  8. A

    Help! Cracked casing

    I just bought a transmission and it got shipped thru UPS. When I went to installed it there was a hairline crack in ther casing at the bellhousing. Can the crack be fixed or welded or is the trans shot. Please help, I'm not an expert on transmissions but I know most in this board are. Thanks,
  9. A

    Converter

    Help! I just got a converter from a member on the board. It was advertised as a Hughes 2,800 RPM stall. It has the numbers: 21-25L written in hand written red ink. In the Hughes website, this is a 2,500 stall for a 200r4 transmission. The stamped numbers on the converter are...
See more

Online statistics

Members online
4
Guests online
2,481
Total visitors
2,485
Totals may include hidden visitors.

Newest members

Stay Connected

Back
Top