You can type here any text you want

Recent content by Axell

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. A

    Changed oilpumpgasket no pressure!

    Problem solved! I did exactly as i wrote, it was little tricky to fill the oil into the turbo oil line, i took a syringe and sprayed into the line until i it camed out from oilfilter. Then i filled the filter and screwd it back and then i filled the line to the turbo full with oil. Then i...
  2. A

    Changed oilpumpgasket no pressure!

    Ok this is what im doing right now: I have screwd back the housing and filled the gears with lots of vaseline, and then im going to fill the upper cooler line or the turbo line with oil, im not going to have the oilfilter on, when it come out oil from the filter hole i fill the filter with oil...
  3. A

    Changed oilpumpgasket no pressure!

    ok i see, im going to tap out the oil from the engine and drag the engine at the crankshaft to if its ok. If its ok iam going to fill the upper cooler line and pour oil into it, and oil in the gears with vaseline and then run the engine without any spark.
  4. A

    Changed oilpumpgasket no pressure!

    At the housing there were some new marks so that could be it, there where no new oil in the housing thou. The engine run for 20-30 sec so the engine could not be hurt in my oppinion. But im sceptic, is it difficult to pull the camsensor? What do you mean to pack the gears? with vaseline?
  5. A

    Changed oilpumpgasket no pressure!

    The sound was not nice, i think i have to remove the cam sensor... It was like the hole engine cut.. Can i try to oil in the gears with lots of vaseline and take off the sparkplug cables so the engine goes round a couple times? or is it stupid?
  6. A

    Changed oilpumpgasket no pressure!

    When you say prime the pump do you men like oiling it? The gear that drives the pump was in the pos that it where before so it must be that the gears didnt had any oil ? The pooch was not nice to hear... now im going to take some vaseline on the gears, should i do more?
  7. A

    Changed oilpumpgasket no pressure!

    Changed the gasket between oilpump and the housing because it was leaking oil. When i took of the housing, the gears came out, the one gear is running free and the other is going on the camshaft or the crankshaft i have no idea. So i changed the gasket and put the gear thats drives the gears at...
  8. A

    Fast xfi Electronic Spark Control

    I have the Fast Xfi system, i didnt built the car, so i wonder if the Electronic Spark Control is used by the fast system? Because my car only runs at 4 cyl, so i need a new Electronic Spark Control and a new igniton control module also. Axell from Sweden
  9. A

    FAST XFI V 1.34 download?

    Where can i get Xfi 1.34 ? Is there anybody who knows where i can download it?
  10. A

    Fuel problem T-type Fast xfi

    I downloaded CC com XFi 1.30 version and now i have the same comport on the pc and CC com XFI. It still wont connect. I have sent a message to Fast waiting for answer.
  11. A

    Fuel problem T-type Fast xfi

    Ok i really appreciate your help man! Ive have checked updates @: http://www.fuelairspark.com/Pages/296/Software.aspx Look at the picture, logical it seems that i dont have the right version...
  12. A

    Fuel problem T-type Fast xfi

    When i open communications i have these to chose: Retrive calibration, Send calibration, Firmwire upgrade now, device communication. I have no setup icon :S. I tride to insert a picture in this message but it doesent work either....
  13. A

    Fuel problem T-type Fast xfi

    I find it. In COM6. how do i sync it now?
  14. A

    Fuel problem T-type Fast xfi

    Ok, but where do i find the name of the usb device? In the Cummunication spot i have these devices: Can A Can B and Rs 232.
  15. A

    Fuel problem T-type Fast xfi

    I have done a fuelpressure test. 3.2 bar. So its not the fuel either. Is there anybody who has or had any problem to connect to the fast hardware?
See more

Online statistics

Members online
21
Guests online
6,866
Total visitors
6,887
Totals may include hidden visitors.

Latest posts

Newest members

Stay Connected

Back
Top