Recent content by BADASSOMAR
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
-
B
GNS cruising the California coast.
Address for meetup has changed. Around the corner from original spot. 3303 harbor blvd #A103 Costa Mesa ca- BADASSOMAR
- Post #2
- Forum: South Western Area
-
B
GNS cruising the California coast.
quarantine cruise is dedicating August 17th cruise to the grand nationals, bring them out for a good time. Meeting up at 630 am and rolling in by 700am to SoCo 3300 Hyland Ave in Costa Mesa. If you’re on Instagram check out @gbody_hub or email gbodyhub@gmail.com for more info. 😎- BADASSOMAR
- Thread
- Replies: 1
- Forum: South Western Area
-
B
Spoolfool2 Promoted to SW Forum Moderator
Mike , quarantine cruise in Huntington Beach is dedicating the August 17th cruise to the grand nationals. We talked about it at bates. If you could create a post that would be great. Thanks and hope to see you and others out there. 😎- BADASSOMAR
- Post #19
- Forum: South Western Area
-
B
Boost gauge not working
Follow the line see if it’s disconnected somewhere.- BADASSOMAR
- Post #2
- Forum: Turbo Trans Am Tech
-
B
Vacuum booster/ master issues.
No check valve , just the I e on the booster, adding one this weekend, also going through and replacing all vacuum lines that are dry and old. I will look over all my connections and plugs also see if I find anything there. Some one mentioned to me that the TC lockup solenoid coins also be...- BADASSOMAR
- Post #10
- Forum: Brakes, Suspensions, Tires & Wheels
-
B
Repairing leaking shifter shaft with pics sleeve installed over shaft sealing surface
Thank you. I appreciate it.- BADASSOMAR
- Post #16
- Forum: Transmission Talk
-
B
Repairing leaking shifter shaft with pics sleeve installed over shaft sealing surface
Cool write up. Does anyone have part numbers for the seal and kit?? Thanks Omar- BADASSOMAR
- Post #14
- Forum: Transmission Talk
-
B
Vacuum booster/ master issues.
the pedal came from a local guy that has made a few. Booster and master cylinder came from a local parts store. The pedal came from a local buddy that has made a few for other guys and has worked great, booster and master came from a local auto parts store with lifetime warranty, I am going to...- BADASSOMAR
- Post #4
- Forum: Brakes, Suspensions, Tires & Wheels
-
B
Help with GN low load misfire...please.
I’m having very similar misfire issues after I did a vacuum brake swap. Going to check out the cam sensor- BADASSOMAR
- Post #22
- Forum: General Turbo Buick Tech
-
B
Vacuum booster/ master issues.
So I recently did the conversion from the power master to vacuum and now having issues. The day it was completed I drove the car home from shop and while on the freeway doing about 75ish car was running fine, but when speed dropped to about 40 mph or so and I started to accelerate car felt...- BADASSOMAR
- Thread
- Replies: 9
- Forum: Brakes, Suspensions, Tires & Wheels
-
B
Trans pan cork gasket; install dry or w/silicone?
Im going to check this one out my self, im on the same boat. Replaced trans gasket and after a couple days I have a slow leak. 🤬- BADASSOMAR
- Post #26
- Forum: South Western Area
-
B
GNX Wheel Size
They are stamped Japan on rear, along with front /rear only, offsets are different too. 😎 thanks- BADASSOMAR
- Post #3
- Forum: GNX - The fortunate 547
-
B
GNX Wheel Size
What’s the best way to identify original GNX wheels? Thanks- BADASSOMAR
- Thread
- Replies: 5
- Forum: GNX - The fortunate 547
