You can type here any text you want

Recent content by blackgn231

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. B

    Push rod length

    I thought I checked my pushrod length when I built my motor, but not sure if I did it, right . I have been driving my car for a while, and nothing has broken. Would it be too late now to check the pushrod length again or cents, nothing has broken. Should I leave it alone?
  2. B

    Looking for a set of GN 1 valve covers

    Do you have a pic and how much are you asking
  3. B

    Looking for a set of GN 1 valve covers

    Looking for some different types of valve covers for my 87 GN .
  4. B

    WTB Casper's White Face Knock detector

    I did the oil filter adapter at work on a lapping table. but it is leaking from where the gasket and the cover is in the same place it was before but it was fine for a long time then just started leaking and still leaking at the same spot will have to take it down and check don't think its the...
  5. B

    WTB Casper's White Face Knock detector

    Just not sure why after so long it just started leaking in this one area ? I will wait till I have all the gaskets and then take it apart again. Wondering if I missed a small piece of gasket or something. It’s like the gasket is not even touching there the crazy thing is it not leaking more...
  6. B

    WTB Casper's White Face Knock detector

    Well got it back together have good oil pressure but still leaking in the same spot . It’s leaking right at one of the bolts took the bolt out crank the car up leaked just the same soaked the gaskets in oil first before installing them . Not sure why this is happening it was good for a long...
  7. B

    WTB Casper's White Face Knock detector

    It’s installed in the car so that’s not a option . The cavity is .870 and gears are .0872 for a .005 gasket puts a .003 clearance .
  8. B

    WTB Casper's White Face Knock detector

    Well I measured the cavity depth and it’s at the max .870 so it’s going to take around a .005 gasket since I don’t think I can find a .004 gasket a .005 will give me a .003 clearance.
  9. B

    WTB Casper's White Face Knock detector

    Mine is a after market cover
  10. B

    WTB Casper's White Face Knock detector

    I have tried plastigage and the feeler gage method with out a gasket and with a gasket . I am feet different readings every time . It’s driving me crazy . My motor is installed in the car had a oil leak so took the adapter apart to replace the gasket . . Do you need to take the reading on the...
  11. B

    overboost / popping under heavy throttle

    My timing cover is installed so it’s plastigage or I have another plate that I was going to drill a hole where the drive gear is located and and installed it with a gasket by pushing up on the gear till it hits the top of the cavity take a reading and subtract the plate and the gasket that...
  12. B

    Weld Magnum 2.0 15X3.5 Brand new

    Ok I was worried about it cutting through if I went to deep .
  13. B

    Weld Magnum 2.0 15X3.5 Brand new

    It says the grove should be a 1/4 deep that seems a lot this is mine it’s just a little less then a 1/4 . Does it have to be a 1/4 anyone ? Will it cut through at a 1/4 ?
  14. B

    overboost / popping under heavy throttle

    Thanks
  15. B

    overboost / popping under heavy throttle

    What is the torque for the 6 oil filter adapter bolts? Thought I saw it was in inch pds? .
See more

Online statistics

Members online
24
Guests online
1,249
Total visitors
1,273
Totals may include hidden visitors.

Newest members

Stay Connected

Back
Top