The Spohn bar will have a lower "rate" than the other bars. I have a Spohn pro-touring bar on my 72 GS built for handling. When I was purchasing it, the seller described the HR bar as a "drag bar", having a different purpose in life than a "pro touring" bar. So, I think the best bar will...
That is quite a list of possible issues! Which of these could be addressed by the shift kit, or could at least be inspected/verified at the time of installing the kit?
I don't really want to spend an evening on my back installing the kit, and then still have to pull the trans for a rebuild...
After storing my 22 year old Eagle GTs, I now have some drag radials and good traction. New problem - My th200 is slipping when going into 2nd at full throttle. The trans behaves properly at part throttle and going into other gears at WOT. Car is basically stock, and has 18,000 miles. I have...
Thanks for the offers and assistance. I bought a reman MAF from Oreilly's and installed last night. It has the screens. Car cranked and idled as it did before! I suspect the lack of screens in my old MAF was the culprit. I will drive some this weekend to verify all is well. This is the...
I ordered a TT chip tonight, and noticed that the TT website says to run at least one screen. I think I will order a new MAF to have a spare and get the screens that I am missing. They do all come with screens, don't they? Any preferred brands or sources for a MAF? Are they all remans? I'm...
No scan tool at this time. I have ordered one from Full Throttle, but they are out of stock right now. I've been thinking about a TT chip. I guess I will order one now. Does anyone have an old screen I can buy to try out?
Did not see any screens, but since I am new to TRs, I would not know what they look like. Anybody got a pic? I will check vacuum lines. Any common problem ones I need to start with? Car is so stock looking, its scary.
As one of my first mods, I installed a Tinman cold air kit. Now I have a terribly cold natured car and a very rough idle even when fully warm. Stumbles badly when coming off idle as well. Cruises fine and runs fine at WOT. Chip is unknown origin, an old one from previous owner. Car was a...
While attempting to test fit some new wheels, I discovered my 7/16" lug nuts won't go on. Then I notice the "M" on the stud and "metric" on the stock lug. Duh.
So, what size lugs do I need to order?
I installed a new pump and box on my 72 GS. Had to turn the wheel back and forth 20 times or more while engine idling. Starting working a little. Then drove very slowly up and down my driveway (300' long) while turning wheel lock to lock. Did this maybe a dozen times, starting working better...