Recent content by John B

I have decided to sell my original stock conversion exhaust system from my first LS1 swap when I modified a stock set of '99 F-body manifolds to fit my 88 Monte SS. The catalytic converters are used so that the car could pass emissions testing. These pipes have been modified to still accept...

You might have seen this pic that I posted on my LS1 swap webpage and MonteCarloSS.com http://www.montecarloss.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=18;t=001114 (scroll down to about the middle of the page!). Hope this helps.

Pic & details at http://www.montecarloss.com/ubb/ultimatebb.php?ubb=get_topic;f=18;t=001501;p=1#000017

I did a search and couldn't find any before I did mine. I figured that if I put out a nice bold title to this thread that I could quickly find all those like yourself that already have done this ;) Nice work Kendall!

No, I use a 3/4" adapter to fit the Momo's but now I don't need the adapter, they will fit fine without them and now clear everything. Thanks for the link. The info there is so sketchy there is no real clue as to what he did where the trunk hinge box connects to the inner fender or if he has...

For those of you that want to fit the really big meats on your G-body have I got a treat for you! Many people have frame notched their G-body's for additonal wheel clearance but I have taken it one step further to ensure the ultimate tire clearance so that you can actually corner in your car...

Peace:)

Pay close attention to what you posted here about thebenson.org pic! If you notice carefully, the arrow points to the outer most portion of the lip....so yes, this pic is correct, just like I already stated!

Mrhotwheels , not trying to flame you but you were taught incorrectly and AFS is "clueless" when it comes to measuring backspacing based on the pic they show. Backspacing is always measured to the lip of the wheel, not the bead...end of discussion. If you don't believe me (and you don't have...

Not True! Backspacing is measured from the outermost lip of the wheel. Typically an 8" wheel is ~9" wide overall lip to lip making the backspacing ~4.5" for zero offset as mentioned above.

Sounds excellent! Count me in! Do we have enough people now?

I could be interested if you could tell me the advatages of this unit over the stock one.

Thanks for the positive feedback StageII86 :) You're probably right about this...I have a "lowly" 221/221°, 0.559"/0.559" 114° l/c cam in mine :D

StageII86, why would you make a statement like this......I tuned mine myself with LS1_Edit and it was a piece of cake....and again, results in my signature (N/A ported heads and mild cam).

If it's still for sale, this is a nice one http://www.montecarloss.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=19;t=001895