scgnx2's latest activity
-
scgnx2 replied to the thread GN's built in Pontiac MI per day?.Great info, Thank you. Interesting they upped the Turbo Engines to 125 builds a day. They were also setting up stock for Pontiac ASM... -
Actual build date is most likely a few days before the invoice date. Cowl tag will show week of month the car was built. See my pdf...
-
scgnx2 replied to the thread GN's built in Pontiac MI per day?.If you pull the rear seat out there should be a build sheet in there. Mine was dated 10/27 which is the date of Fischer body build...
-
scgnx2 reacted to Chuck Leeper's post in the thread runs with stock ecm, not with xfi 2.0 with
Like.
You have the rpm cut set to 50. From the basic setup info: " 6.2.2 Spark Cut Rev. Limit This is an ignition rev limiter used for maximum... -
scgnx2 replied to the thread GREMLIN CONTINUES TO BE PRESENT MAKING DRIVING UNSAFE.Use your scan tool and post the numbers at warm idle. MAF, BLM, INT, BAT, etc. A Powelogger file would be very helpful otherwise it’s a...
-
scgnx2 replied to the thread how's your wheel size.The tire selection for 16x8 rims is almost non existent. There are no 255x50x16 street tires available in my searches. Just some drag...
-
based on the combos i have seen Sam's 69mm hubless turbo will probably spool /initially lite just off idle and have extremely low...
-
limp is triggered by the white bypass wire to the ignition module going open if the white bypass wire to the ignition module is sound...
-
Great question. I have a long winded story on that but I’ll spare everyone the boring details. Long story short, a change in goals and...
-
I've been in the injector cleaning business since 1994. Since then, my ASNU machine has been a really reliable unit. However, my old bod...
-
I’m going to hook up a volt booster and the connections and everything seems plug and play till a noticed the slice in the connector are...
-
scgnx2 replied to the thread GN1 72mm T/body.It’s great looking piece, but it’s very pricey. If you have stock plenum adding an RJC power plate will improve the air distribution for...