Recent content by scojack_2001

  1. S

    Blazer brake line brackets

    Does anyone know the part number for the 2WD Blazer front brake line brackets, where the metal line meets the hose for the caliper? I need a set for my GN. DId the Blazer brake swap a few years ago, never got them; now I'm pretty sure I need them. Any help appreciated!
  2. S

    New Blazer Brakes

    I did this swap back in 2012. Works great. The only thing I didnt do is the metal brake line brackets. Which I'm currently trying to track down a set. Russell brake hoses work okay, just dont turn on the locks and break one in half... Ask me how I found that out. Thank God I was only going...
  3. S

    New PB at Cecil County last weekend

    Went to the track last Saturday for a private track rental. It was kind of a day of decision for me. Drove my GN there, took everything out it, and raced it. Didnt have a clue where the boost was since I havent raced it in over two years. Mainly been driving on the street lately. Haven't had...
  4. S

    Fastest Pump Gas / Alky Cars (updated 10.07.18)

    Went to Cecil County Dragway in my GN yesterday for a private rental. Havent done much to the GN in anyway this year. But I put fresh gas in it and topped off the methanol tank and checked the fuel pressure. Had no idea where the boost was on the first pass. Didnt hit it hard because I wasnt...
  5. S

    Is turbo tweak still around?

    My original motor went 11.32 @ 118mph with a TE-62 and Dutt neck intercooler. 50 pound injectors, single pump, etc etc. Maybe 26psi. I got my stock turbo full weight GN to run 11.98@111 on a beat MT DR. That's with a stock intercooler (ported only, NO Dutt neck), stock turbo with ported...
  6. S

    Is turbo tweak still around?

    My original motor went 11.32 @ 118mph with a TE-62 and Dutt neck intercooler. 50 pound injectors, single pump, etc etc. Maybe 26psi. I got my stock turbo full weight GN to run 11.98@111 on a beat MT DR. That's with a stock intercooler (ported only, NO Dutt neck), stock turbo with ported...
  7. S

    Street Outlaws " The 405 " has been renewed for a season 7 but no release date has been given.

    Sometime in April I believe. Pretty sure I just saw an announcement the other day
  8. S

    Spark plug question

    I ran the ACDelco CR43TS plugs gapped at .030" for years at ~20psi and no issues. Ran the NGKs for a while and saw no noticeable performance increase.
  9. S

    fuel pressure regulator

    I just got mine from Discount Hydraulic Hose. They were pretty cheap.
  10. S

    What options are there for HD replacement rocker shafts?

    The braces don't help. I broke a rocker shaft when I freshened my motor after 300 miles. They don't like high lift roller cams too much. Put a set of TA Performance shafts in and no issues since.
  11. S

    Braces and body mount questions

    I'll agree that you should wait to see what you actually got. I have had the Kirban rear seat braces in my GN for years. They work great. I'm actually going to convert mine over to the GNX style over the winter. And the SC&C brace, you can't go wrong with it. Yeah, its expensive but it works...
  12. S

    2000+ Blazer 2wd dual piston caliper opinions

    I did this to my GN three years ago. Got the spindles with hubs out of the yard for $100. Made brackets to use LS-1 F Body 12" brakes. I used EBC pads and rotors and remanned parts store calipers. Had to put longer wheel studs in the hubs. No big deal. And run a 7mm spacer to clear my 16" GTAs...
  13. S

    Winter is here whats everybody's project they got cooking??

    Last thing I did to the GN was put the new front hubs on it. Wasn't bad, except for the fact I have a bad case of CRS.... Completely and utterly forgot I put long wheel studs in them, to clear the thicker rotors and still have enough lug engagement. None of the usual parts stores had any, and if...
  14. S

    What did you do to your GN today?

    Curious to know what brake lines you used? Did you buy a kit? I know Right Stuff Detailing makes a SS brake line, but not sure if that's a full set or not. Planning on having mine done when I send my GN to the body shop to get the bushings done. I don't have the time or experience to do it, so...
  15. S

    upper plenum bolts?

    Don't forget the blue LocTite so you don't get a vacuum leak. Ask me how I know...
Top