You can type here any text you want

Recent content by SSedan64

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. S

    Converter lockup schematic

    Mo TCC Info, Electric = http://www.turbobuick.com/forums/threads/what-signals-should-i-have-at-the-trans-plug.250799/ Hydraulic = http://www.turbobuick.com/forums/threads/lockup-solenoid-tutorial.260404/
  2. S

    Problem with no 2 to 3 gear change and no reverse?

  3. S

    Converted to NLU = Issues

    87 should have the #690 Pump body with the step machined to prevent Bushing walk. Links above are for a 700r4 but, they use the same style/type Pump as the 2004r. Just use a different style/size Stator support.
  4. S

    Converted to NLU = Issues

    Mo Info on Drain/Relief hole & staking the pump Bushing if it's an older non-stepped seat Pump body/housing. http://www.crankshaftcoalition.com/wiki/T-700r4_through_4L70E_tips_and_tricks#Drain_back_holes...
  5. S

    foxbody buick swap trans questions

    You should talk to Dusty on here about a 9.5" PTC Non-Lock Converter. http://www.turbobuick.com/forums/members/dusty-bradford.65/
  6. S

    No reverse! Need help! Gotta get home for Xmas!

    What about the Low/Reverse "cup plug / rubber seal" in the Case? May have been damaged or fallen out when the Valvebody was removed. Figure 8-19 on Pg.132 in CK's manual. Low/Reverse "cup plug / rubber seal" can be seen in the 2nd Pic here, http://gnttype.org/forums/showthread.php?t=9724&page=2...
  7. S

    alto red wide band

    Carbon has more/better holding power, Kevlar has more longevity.
  8. S

    Band apply

    It hits the side of the raised section. Yes it can create a dent, as long as it doesn't push a hole through the contact area and the Band to Pin clearance is correct it should be fine. May be necessary to use a Screwdriver to help align/position the Band if it's needed. The Pan would have to be...
  9. S

    2004r separator plate question

    You should be able to see where the Balls have been moving in the Case/Vbody & Sep. Plate. Clean/Polished areas. This should also help: http://www.bing.com/images/search?q=2004r+checkball+location&qs=n&form=QBIR&pq=2004r+checkball+location&sc=0-0&sp=-1&sk=
  10. S

    Band apply

    Area where half circle/ half moon is on left side raised rib.. http://www.sonnax.com/system/announcement/S043961.pdf Or http://www.sonnax.com/product-lines/high-performance-transmission/parts/1994
  11. S

    lock-up not working!

    Solenoid Info/Pics >> http://www.montecarloss.com/TCC_Solenoid.html You'll need a splice in Universal Solenoid, the OEM type w/Harness are no longer available. Examples: http://www.transmissionpartsusa.com/2004R_transmission_solenoids_s/4847.htm...
  12. S

    trans lines

    Case to Hose/Line = Male -6 AN to 1/4 in.-18 NPSM http://www.summitracing.com/parts/SUM-220027/?rtype=10 A 45* fitting on end of Hose @Trans end would probably work best.
  13. S

    Looking for a good Buick transmission shop near Chester, NJ (Metro NYC)

    When using an Aftermarket Carb, a TV geometry corrector bracket is needed. Easy to spot on the Carb linkage. http://www.summitracing.com/parts/sum-700203 Dave Husek may be close to you. http://www.turbobuickperformance.com/ Other Shops/Builders list >>...
  14. S

    slant 6/2004R conversion

    http://www.turbobuick.com/forums/threads/the-very-first-bolt-on-bell-2004r.402724/ Probably overkill for your App.
  15. S

    Bad trans limit RPM?

    At WOT the Gov & Vbody shift valves control shift points. At part throttle the Gov, TV & Vbody shift valves control shift points. From BTO's site: "The TV cable used with the 4L60/700R4, 2004R & 200/200C transmissions should not be thought of as an automatic downshift cable. The TV cable used...
See more

Online statistics

Members online
16
Guests online
1,636
Total visitors
1,652
Totals may include hidden visitors.

Latest posts

Newest members

Stay Connected

Back
Top