Recent content by VIN7

  1. V

    update scanmaster G

    I could only get it to update through bluetooth
  2. V

    ALDLdroid and adx

    The version of aldldroid required a new adx file. Bob hooked me up the adx and all is good.
  3. V

    ALDLdroid and adx

    So I updated my PLC, SCMG, and downloaded aldldroid I got my Samsung Galaxy S9+ to pair with SCMG (bluetooth name is "scanmaster") I added the adx files to aldldroid, selected SCMG_BT_00a1.adx (latest adx on Bob's site) When I try to connect it gives me "No response from ECU". I've tried to...
  4. V

    Help me with car reluctant to shift from 2 - 3

    Here's a thread where I had issues with low pressures and what I tried to raise them. https://turbobuick.com/threads/trans-pressures.424043/#post-3524939
  5. V

    Help me with car reluctant to shift from 2 - 3

    The plunger may be returning to it's resting position, but the valve on the other end of the tv spring could be hanging up. Plus when you change tv spring length and/or rate it will affect the action on the throttle valve. Do you have a pressure gauge? Check this thread for info about proper...
  6. V

    Heater control valve replacement part.

    Jim, when my brass valve got stuck, it was due to the ball valve being jammed up from sediment. I soaked the valve in CLR and worked the valve open and closed until it moved freely. See if you can work the valve (while it is still connected) by hand.
  7. V

    Accumulator valve

    What role does the accumulator valve play? What are the different effects of the br vs other accumulator valve? Why use the stock line bias spring in the accumulator valve?
  8. V

    heater valve ?

    Here it is mocked up in my friend's LS1/T56 cutlass swap
  9. V

    heater valve ?

    Look at the 3rd gen camaro heater valve. It has 4 ports and is vacuum actuated. The two ports off the water pump have to loop, the 4 port valve allows this when closed (and opened as well).
  10. V

    Loud pump??

    Replaced the trans. I suppose it was an issue with the pump setup. No way to know definitively now.
  11. V

    Search broken?

    I use google, type in your search terms and at the end type site:www.turbobuick.com
  12. V

    200 4R "whine" at slow speeds

    If you do decide to add the servo cushion spring, make sure the servo piston seals are well lubricated when you reassemble.
  13. V

    servo retaining ring

    Thanks Dave, fortunately I found mine. But for future reference, is early without the tangs? And are early and late interchangeable in the same case? Thanks,
  14. V

    servo retaining ring

    Anyone know a source for the servo retaining ring? Thanks
  15. V

    Kirban upgraded H4 headlights (4) kit w/harness

    I know exactly what you are talking about, I think you'll be happy with the H4 conversion.
See more
Top