KevinBroadwater
Member
- Joined
- Mar 4, 2002
- Messages
- 454
1987 Buick Grand National 3.8 Turbo in GREAT condition. I run it on the street, as well as on the drag strip. Following are details regarding the car:
* 62,800 miles
* Motor:
* .020 JE's with Calico Coatings Ceramic Tops/Teflon Skirts
* Stock Rods with Polished Beams and ARP Bolts
* Stock GN Crank .010/.010 Cut to .0016-.0018" Clearance
* Billet 1/2/3 Caps, RJC Billet Girdle with Crank Scraper, ARP Studs
* Clevitte 77 Main/Rod Bearings, TA Cam Bearings
* Crane 210/214 Billet Roller Cam
* PTE Cam Retension Hardware Upfront
* Buick Tchain (as per roller kit)
* BHJ Harmonic Balancer with Ring, JW Flexplate (sfi certs A ok)
* Oil Pickup and 20 Bolt Oil Pan Installed
* Balanced and Blueprinted Assembly
* Champion Iron Heads and Intake te45a Turbo
* Transmission:
* Vince Janis
* Suspension QA1Adjustable Shocks & HR Parts Upper and Lower Control Arms
* Extra Wheels with Slicks 28 X 9
* Removeable Rollbar Side & Back Bars
* FAST XFI installed by Bill Anderson
* Interior Gauges
* Oil Pressure
* Water Temperature
* Tack
* Knock Detector
* ATR Single Shot Exhaust
* Show Quality Paint Job in 2006 with all new T-Top Gaskets/Seals
* Precision Front Mount Intercooler
* 3500 Torque Converter
* Dyno Tested - Max Power = 520.34/Max Torque = 531.62 under a VERY light tune
* Extra Parts, including Stock Short Blocks with Heads
I am sure there is much more about this car that I am forgetting; however, if you have any questions, please call me at 240.727.6815.
Price is $18,000.00 or obo.
* 62,800 miles
* Motor:
* .020 JE's with Calico Coatings Ceramic Tops/Teflon Skirts
* Stock Rods with Polished Beams and ARP Bolts
* Stock GN Crank .010/.010 Cut to .0016-.0018" Clearance
* Billet 1/2/3 Caps, RJC Billet Girdle with Crank Scraper, ARP Studs
* Clevitte 77 Main/Rod Bearings, TA Cam Bearings
* Crane 210/214 Billet Roller Cam
* PTE Cam Retension Hardware Upfront
* Buick Tchain (as per roller kit)
* BHJ Harmonic Balancer with Ring, JW Flexplate (sfi certs A ok)
* Oil Pickup and 20 Bolt Oil Pan Installed
* Balanced and Blueprinted Assembly
* Champion Iron Heads and Intake te45a Turbo
* Transmission:
* Vince Janis
* Suspension QA1Adjustable Shocks & HR Parts Upper and Lower Control Arms
* Extra Wheels with Slicks 28 X 9
* Removeable Rollbar Side & Back Bars
* FAST XFI installed by Bill Anderson
* Interior Gauges
* Oil Pressure
* Water Temperature
* Tack
* Knock Detector
* ATR Single Shot Exhaust
* Show Quality Paint Job in 2006 with all new T-Top Gaskets/Seals
* Precision Front Mount Intercooler
* 3500 Torque Converter
* Dyno Tested - Max Power = 520.34/Max Torque = 531.62 under a VERY light tune
* Extra Parts, including Stock Short Blocks with Heads
I am sure there is much more about this car that I am forgetting; however, if you have any questions, please call me at 240.727.6815.
Price is $18,000.00 or obo.