GRAND NATIONAL
LOCATED in Morris Plains, New Jersey
109 .20 over with Wiseco Pistons
ARP hardware head studs and billet center mains
Stock Rods/Crank
Ported Iron heads with stainless Manley Valves and beehive springs, Harland Sharp 1.65 Roller Rockers with 210/210 Hydraulic Roller Cam
60lb Motron Injectiors/TT Chip
Racetronix 340 fuel pump
Razors ALKY kit
TE44 turbo
New Kirbans Adjustable Fuel Pressure Regulator
Precision Stock Stretched Intercooler
3 inch Terry Houston down pipe
Rear Seat Brace
HR motor and trans mounts
HR lower control arms
New Dual rear air bags
New RJC pulley kit
New Metco angled valve cover breathers
New T/A Rear End Girdle
New Kirbans Vacuum brake conversion
G-Body parts slotted rotors and drums with stainless front lines, I have the rear line but not installed.
New GNS line lock
New but not installed 3.5 Dynotech Aluminum Driveshaft
New Optima battery
New wheel well moldings
New front air dams(GM)
New Kirbans 200amp alternator
New Caspers Voltage Booster
I'm working on putting a new transmission in the car first week of March built to handle the power. The stage 2 transmission in the car currently was starting to act up and could just be the TV adjustment,but I didn't want to take any chances. If you want a better deal without the TRANS work let me know.
Motor work was done by Kevin Hess (turbot990) in 07 has less than 3,000 miles on it since that time. Call or text me 973-479-1682 Matt. $18,500 when TRANS is Completed
This car is rust free with very nice paint, undercarriage is spotless as well. Car has power windows/locks/cruise control tinted rear windows. Has Factory G80 Posi Rear
Wife and I decided to save for another house.
Sent from my iPhone using Tapatalk
LOCATED in Morris Plains, New Jersey
109 .20 over with Wiseco Pistons
ARP hardware head studs and billet center mains
Stock Rods/Crank
Ported Iron heads with stainless Manley Valves and beehive springs, Harland Sharp 1.65 Roller Rockers with 210/210 Hydraulic Roller Cam
60lb Motron Injectiors/TT Chip
Racetronix 340 fuel pump
Razors ALKY kit
TE44 turbo
New Kirbans Adjustable Fuel Pressure Regulator
Precision Stock Stretched Intercooler
3 inch Terry Houston down pipe
Rear Seat Brace
HR motor and trans mounts
HR lower control arms
New Dual rear air bags
New RJC pulley kit
New Metco angled valve cover breathers
New T/A Rear End Girdle
New Kirbans Vacuum brake conversion
G-Body parts slotted rotors and drums with stainless front lines, I have the rear line but not installed.
New GNS line lock
New but not installed 3.5 Dynotech Aluminum Driveshaft
New Optima battery
New wheel well moldings
New front air dams(GM)
New Kirbans 200amp alternator
New Caspers Voltage Booster
I'm working on putting a new transmission in the car first week of March built to handle the power. The stage 2 transmission in the car currently was starting to act up and could just be the TV adjustment,but I didn't want to take any chances. If you want a better deal without the TRANS work let me know.
Motor work was done by Kevin Hess (turbot990) in 07 has less than 3,000 miles on it since that time. Call or text me 973-479-1682 Matt. $18,500 when TRANS is Completed
This car is rust free with very nice paint, undercarriage is spotless as well. Car has power windows/locks/cruise control tinted rear windows. Has Factory G80 Posi Rear
Wife and I decided to save for another house.
Sent from my iPhone using Tapatalk
Last edited: