This car has been modded a lot! I've cut and pasted my mod list from a word document I maintained over the years. I recently blew the turbo and it took apart the engine. Everything else is in tact and can be vouched for by Jeff from Billy Anderson (car is at their shop now).
This is a serious foundation for anyone with a spare engine, time, money etc and can easily be flipped after installing a stock 109.
Here's a link to my album with some pix:
Picasa Web Albums - Kenneth - Buick
Please email me at kenny.nero@gmail.com if interested as I hardly get on the forums anymore. I'm asking 5K but am very much willing to negotiate. Thought I'd throw it on the forums before the wolves on craigslist/ebay get a crack at it.
Thanks for looking.
Mods:
Car: ~ 185K
Needs engine
CPTE60 – needs to be rebuilt
009s
3” Mease Downpipe
“HiFlow” cat converter
2.5” cat-back Hooker exhaust system
Gbodyparts stretched stock location intercooler
Vac Brakes conversion
Beefed 200r4 transmission
10” 3200 stall (Pat’s)
Alky kit (low fuel wires ripped out of reservoir, can buy from alkycontrol.com)
Spohn’s Sway bar
UMI boxed lower control arms
UMI tubed upper control arms
SCandC.com stage 2 suspension kit (installed at 174K)
tall upper and lower ball joints
adj. upper control arms
Moog Centerlink, Idler arm, Tie rods (inner and outer), spohn tie rod adjusters (installed at 174K)
Stock POSI rear
Kirbans rear bushing kit (installed at 182K)
Bilstein Shocks (installed at 174K)
Moog 5658 front springs (lowers stock by 1.25” installed at 174K)
BuickGN.com cold air kit
Dual Fans w/ Caspers switch above radio
Walbro 340 hotwired fuel pump
16” GTAs (some curb rash, def a good 10 footer when clean)
20% tints (can easily be removed if not your taste)
Tinted fog light covers
GNX style fenders and louvers
Spoiler
Two-tone burgundy/black interior
Burgundy trunk kit
Black paint job ~ 1.5 years old
The bad?
Header panel pieces next to grille was ripped off by newb thieves. One of the pics in the above album show this.
This is a serious foundation for anyone with a spare engine, time, money etc and can easily be flipped after installing a stock 109.
Here's a link to my album with some pix:
Picasa Web Albums - Kenneth - Buick
Please email me at kenny.nero@gmail.com if interested as I hardly get on the forums anymore. I'm asking 5K but am very much willing to negotiate. Thought I'd throw it on the forums before the wolves on craigslist/ebay get a crack at it.
Thanks for looking.
Mods:
Car: ~ 185K
Needs engine
CPTE60 – needs to be rebuilt
009s
3” Mease Downpipe
“HiFlow” cat converter
2.5” cat-back Hooker exhaust system
Gbodyparts stretched stock location intercooler
Vac Brakes conversion
Beefed 200r4 transmission
10” 3200 stall (Pat’s)
Alky kit (low fuel wires ripped out of reservoir, can buy from alkycontrol.com)
Spohn’s Sway bar
UMI boxed lower control arms
UMI tubed upper control arms
SCandC.com stage 2 suspension kit (installed at 174K)
tall upper and lower ball joints
adj. upper control arms
Moog Centerlink, Idler arm, Tie rods (inner and outer), spohn tie rod adjusters (installed at 174K)
Stock POSI rear
Kirbans rear bushing kit (installed at 182K)
Bilstein Shocks (installed at 174K)
Moog 5658 front springs (lowers stock by 1.25” installed at 174K)
BuickGN.com cold air kit
Dual Fans w/ Caspers switch above radio
Walbro 340 hotwired fuel pump
16” GTAs (some curb rash, def a good 10 footer when clean)
20% tints (can easily be removed if not your taste)
Tinted fog light covers
GNX style fenders and louvers
Spoiler
Two-tone burgundy/black interior
Burgundy trunk kit
Black paint job ~ 1.5 years old
The bad?
Header panel pieces next to grille was ripped off by newb thieves. One of the pics in the above album show this.
