2 step help

[JR'S1QUICK86]

Ok I wired up the two steps the Run light turns on & the trigger light turns on at 2000 rpm but Nothing happens

 

[JR'S1QUICK86]

Also someone cut the fuse adapter off so maybe that is my problem

 

[pacecarta]

you need to have the fuse interrupt or run the wires to the power wire at the ignition module , cut that wire and connect the two wires from the two step to the ends
there was a thread on it titled some thing like "ignition hot wire and 2 step" because if you have a casper ignition hot wire you cant use the fuse adapter as bob supplied

 

[pacecarta]

heres the diagram
http://i215.photobucket.com/albums/cc223/dougsfastz/hotwire.jpg

looking at that diagram ... cut the wire to pin M on module and run the pink wire from 2step to the module side and run the red wire from 2step to the other side (12v key on))

 

[JR'S1QUICK86]

Thanks Paul I'll give a try tomorrow