I just got a 200 4R from the junkyard to swap into my monte carlo ss. Unfortunately when they drilled a hole into the pan to drain it, they drilled into the 1-2 shift accumulator assembly. I need the assembly and a pan (open to options on the pan). Thanks guys!
200-4R 1-2 Shift Accumulator Assembly
- Thread starter TardyBob
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
jpwalt1987
Well-Known Member
- Joined
- Nov 9, 2003
- Messages
- 1,885
Post a picture of the hole they drilled. You may be able to just tap some threads then loctite a set screw into it. I block the 1-2 hydraulic circuit on my stuff.
Posted from the TurboBuick.Com mobile app
Posted from the TurboBuick.Com mobile app
David Husek
Turbo Buick Performance
- Joined
- Mar 16, 2007
- Messages
- 914
Contact any trans vendor on this forum and you should be able to get what you need.
If not, contact me, I have a used acc housing and pan.
If not, contact me, I have a used acc housing and pan.
turbo nasty
Turbo Dojo / MNTR
- Joined
- Jul 19, 2001
- Messages
- 9,478
Jb weld
Posted from the TurboBuick.Com mobile app
Posted from the TurboBuick.Com mobile app
1fastcobra
Well-Known Member
- Joined
- Jan 24, 2012
- Messages
- 1,228
I have a pan $25 + ship
Posted from the TurboBuick.Com mobile app
Posted from the TurboBuick.Com mobile app
Similar threads
