You can type here any text you want

210/210 Ken Duttweiler Roller Cam

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

black86gn

Boost addict
Joined
Oct 5, 2009
Messages
109
Used but in good conition, would like to get 250.00 plus shipping or make a reasonable offer.
 
Lift, lobe sep. What year does it fit ? What does the 210/210 stand for what's the duration?

Posted from the TurboBuick.Com mobile app
 
The lift will come out to .523 with 1.65 ratio rockers or .475 with 1.50 rato rockers. 110 degree lobe seperation an yes the 210/210 is the advertised durtion. This cam will work with any 84-87 Turbo Buick but will require roller lifters, different pushrods springs and I would highly reccomend roller rockers.
 
Is it a billet cam or ductile iron?

Posted from the TurboBuick.Com mobile app
 
I need this sold by no later than 15 November, I am leaving on an aircraft carrier on the 17th and will not be able to ship it out. Make me an offer!


Posted from the TurboBuick.Com mobile app
 
I don't need a cam, but I'll salute you, have good trip, a safe sail, and a safe return!!!

Rex
 
Thanks Rex, I will be on the flight deck troubleshooting and launching F/A18s! Only one month out then a long deployment starting in Febraury.


Posted from the TurboBuick.Com mobile app
 
I am taking this off the board soon, pulled it out of the box today (haven't looked at it for years) and it's a billet roller. So I am more than likely going to use this with the new combo unless someone gives me an offer I can't turn my head from.
ImageUploadedByTurboBuick Mobile1384380419.724301.jpg



Posted from the TurboBuick.Com mobile app
 
What more part would I need to get to run it in my 84? Would it be more cost effective for me to look at a complete kit?

Posted from the TurboBuick.Com mobile app
 
Yes this cam would work with everything you got to include those springs you have, I should have pulled it out and looked at it when you asked me...now that I know it's a billet can, it changes a lot!


Posted from the TurboBuick.Com mobile app
 
Shouldn't I get roller rockers ams roller lifters etc...

Posted from the TurboBuick.Com mobile app
 
AMS2 Lawrence here good luck on the carrier I did my 4 on there. how much for the cam for another navy guy?
 
What more part would I need to get to run it in my 84? Would it be more cost effective for me to look at a complete kit?

Posted from the TurboBuick.Com mobile app
This is not a drop in cam.. You need double roller timing set, roller thrust setup for the nose, cam sensor gear, spacer, bolt, roller button and an oil mod to squirt the chain and gears... Is best to drill a hole in the oil galley plug..
 
Back
Top