You can type here any text you want

3.8 Turbo engine swap

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Klag

New Member
Joined
Dec 8, 2007
Messages
9
I was just wondering if anyone can post a link to some information (or even another thread) about intstalling a 3.8 turbo Buick engine into another GBody car like a non turbo Regal, or even a Cutlass or Monte Carlo.

I know it's been done before, just curious as to some of the costs, procedures etc. Something I've always considered doing :)

OOPS wrong forum, sorry!
 
You'll need the wiring harness for sure as well as all of the pieces like the fan, intercooler (if going '86-'87 engine), ECM, exhaust for turbo car....the list goes on.

I was going to do the same swap before I learned I'd be miles ahead just buying a turbo car to start with. :smile:
 
Here ya go http://www.turbobuick.com/forums/general-turbo-buick-tech/185317-when-converting-regular-regal.html

Read somewhere it took a guy 4 months doing everything correctly with hand tools. You will need an 8.5 gn rear or an 8.5 with a 3.42 gear. just as well get a posi one and be done with it. You don't need to swap the dash harness unless you want the lights and tach if I remember right. THe engine harness should be plug and play. You can get a computer from a few of the fwd cars, but then you will need botht he chips. Better to get a donor car but BWEAVY ( gbodyparts.com ) can hook you up with everything you need or you can check the parts forum for someone parting a rust bucket. Don't need to do the tail light harness if you runa hot wire kit. You will need an f body radiator, oil and tranny cooler, pass side inner fender well, you can keep your vac brakes just need to get a vac block with the extra port on it. You will need the serp setup and ALL accessories, fuel lines, a rear sway bar, just as well put ALL the new body bushings in, do the A arm bushings whil everything is out, Don't know what's different on the a/c setups besides the lines and compressor, need a different heater box with the heat shield, etc., etc., Read throught the thread, should have everything I left out. Have fun! If it was me I'd find a whole TB use it for what you need and part the rest out. or sell what you, upb to you.
 
Back
Top