boostmaster
Active Member
- Joined
- Aug 20, 2001
- Messages
- 1,339
What's the actual flow rating on 57lb high impedance injectors ?
57lbers
- Thread starter boostmaster
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
Joe Lubrant
" The Right Stuff "
- Joined
- May 25, 2001
- Messages
- 587
boostmaster said:
My guess would be 57#,
why else would they be called 57's 
Seriously the 57's were the same as the 55's, except for the change from low imp to high imp coil. I believe if you go to RACETRONIX web-site the actual flow ratings are listed.....I was just to lazy tonight to copy the link for you
All right here it is:
Part Number 3172 (has the same calibration as the Siemens P/N 3102 but with a 12 ohm coil)
Static Flow Rate (GAS): 57 lb/hr @ 43.5PSI (300kPa) = 599cc/hr
Static Flow Rate (Test Solvent): 55 lb/hr @ 43.5PSI (300kPa)
Coil Resistance: 12 Ohms / High Impedance / High-Z (No ECM driver modifications required)
The Siemens '3172' is able to operate at a higher pressure and duty cycle than most other high-Z injectors.
Pencil beam spray pattern
Joe
Similar threads
