83 Malibu Wagoon

[BEATAV8]

Is that an actual model or an AI generated model of the car?

That is some real good info for anyone trying to do a swap in an older GM car....

Lol the PO was messing around with AI to make that.

 

[BEATAV8]

Next project. Try something new!
The ECUGN will handle turning on & off the high speed mode.

 

[GNVYUS 1]

Oh ya, you might be the first guy with this in a GN so take some pics of it in the hangar and definitely hit us back with what data you see.

 

[TType85]

Next project. Try something new!
The ECUGN will handle turning on & off the high speed mode.
View attachment 407855

I am running one of these but I have a Ricks tank with a Radium fuel bucket set up. It works great; I use the Holley to control the low/high speed.

compared to a DW300

 

[millen96]

hows it going with new springs just curious what sorta rpm your seeing now ?

 

[BEATAV8]

hows it going with new springs just curious what sorta rpm your seeing now ?

At the track 5825rpm top of 3rd still pulling clean and crisp. Have been way past that on the street in 2nd gear but that’s not really the same as 3rd wide open. She’s seen 6400 more than a few times there. This combo isn’t gonna find the limit of those springs.

 

[BEATAV8]

The Wagooon is getting a winter upgrade!
109 with steel caps, GN1 crank, Scat rods, DSS pistons & some Champion heads (26056 springs).
Cam is a 224/224 on a 114. .553" lift.
Compression 10.4:1
We'll probably pick out a modern 6466ish turbo to do the deed....

Need a few more bits & pieces but the kid has already started setting it up for assembly.

 

[BEATAV8]