83LB Low-Z Delphi Injectors & TT E85 chip

[forcefed86]

Asking $350 for the set shipped.

Injectors are less about a year old. Just bought 120LB Injectors. I went 10.24 maxing out the DC on these 83lb injectors. Good for roughly 600 crank HP.


I bought these from a friend who used them on his mustang. There are 8 total 83lb injectors if you want/need 2 spares we can work something out cheap. I flowed all these injectors locally at "Wichita Dyno" here in KS. They were all great.

Currently have these installed and running on my car.

And FYI you don't need a modded ECM to run these injectors. Mk4 toyota supras or Vr4 mitsu's run High impedance driver ECMS and Low impedance injectors. You just need a resistor pack. These can be sourced on forums or Ebay.

example

http://cgi.ebay.com/ebaymotors/3000...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[49-blues]

Do you have any pics how you have the resister pack wired up to the ECM?

 

[forcefed86]

The wiring instructions are above. You would wire it by the injector harness under the coil pack area, then mount the resistor box on the firewall. Do a quick google search there is a ton of information on it.

I personally have a modded ECM on the buick. I didn't know any better back when I bought it. I've got a resistor box on my daily driver. Using 95lb low-z injectors on it with a high-z ECM with no issues.

 

[forcefed86]

No one wants to switch to e85? Just ran 10.14 on these injectors this weekend.

 

[forcefed86]

$275 shipped for injectors and chip... Firm.

:biggrin:

 

[calais1965]

injectors+chip

$250 and i will take them...

 

[forcefed86]

Thanks for the offer but I'll let this one sit a while. I think $275 is more than fair for like new condition, flowed injectors with a chip. If no one jumps on this I'll get back to you.