Hot Air Beast
Hot Air Lover
- Joined
- Mar 10, 2007
- Messages
- 337
Ok, here are six used parts for an 1987 GN and four other parts for all years.
7 of 12
Hub engine crankshaft and camshaft balancer (25525499) $20
8 of 12
Pulley fan and coolaant pump (25525498 ST) $20
Same pic as 7 above
9 of 12
Power strng pump and pulley assmbly - no reservoir (pulley - 25525201) $75
Same pic as 7 above
10 of 12
Radiator bracket core support $65
I have one fairly clean and one which would have to be blasted ( $45)
11 of 12
Passenger rocker cover w/breather $30
12 of 12
Passenger breather $10
Now for some where there was no part number for me to research, or the research didn't turn anything up. I think they fit all years but I am not sure.
1 of 4
Heater/AC box (3042321) including:
motor with fan cage (5044982) and resistor ( four pin for analog heater controls - 526897) $175
2 of 4
Glove box $25
3 of 4
Hood release cable inner and outer and hood latch w/connection to body bracket $50
4 of 4
AC manifold lines $50
7 of 12
Hub engine crankshaft and camshaft balancer (25525499) $20
8 of 12
Pulley fan and coolaant pump (25525498 ST) $20
Same pic as 7 above
9 of 12
Power strng pump and pulley assmbly - no reservoir (pulley - 25525201) $75
Same pic as 7 above
10 of 12
Radiator bracket core support $65
I have one fairly clean and one which would have to be blasted ( $45)
11 of 12
Passenger rocker cover w/breather $30
12 of 12
Passenger breather $10
Now for some where there was no part number for me to research, or the research didn't turn anything up. I think they fit all years but I am not sure.
1 of 4
Heater/AC box (3042321) including:
motor with fan cage (5044982) and resistor ( four pin for analog heater controls - 526897) $175
2 of 4
Glove box $25
3 of 4
Hood release cable inner and outer and hood latch w/connection to body bracket $50
4 of 4
AC manifold lines $50
Attachments
-
87 pwr strng pump - no res and pulleys.jpg3 MB · Views: 31
-
radiator bracket core support.jpg3.1 MB · Views: 29
-
87 rocker cover with breather.jpg3 MB · Views: 28
-
87 breather cap and pulley with 8485 water pipe heat shield reverse.jpg3 MB · Views: 29
-
heater AC box reverse.jpg3 MB · Views: 28
-
heater AC box.jpg2.8 MB · Views: 28
-
glove box exterior.jpg1.8 MB · Views: 28
-
glove box interior.jpg2.6 MB · Views: 29
-
Hood release cable and latch.jpg2.8 MB · Views: 28
-
AC manifold lines.jpg3.3 MB · Views: 28