87 t project car f/s

[tom robison]

i am selling my 87 t project along w/ everthing buick i own. it is preatty much as follows.
basically it is a complete 87 t minus motor and trans that has been sold already that has been taken apart down to a bare shell for everthing to be sanded to bare metal and cleaned and repainted. right now it is off the frame

the shell is rust free. i bought it to replace the body on my t that was rough around the edges. it is a 86 gn body that i bought from a seller on this board who bought it to part out and use some parts on his restoration. 3 pieces of the floor have been cut out for patch panels on the previos owners car, so when i cut up my t body i saved the floor pieces to weld back in and i have one section tacked in already.tthe body does need some mud work in the upper rear corner and driver side sail panel.It is 90% bare metal , needs the door jambs stripped and some of the firewall stripped and then it is ready for body work.

I have a full grey interior w/ extra parts, 1 console, , 2 dash boards( one t type and one gn),front bucket and rear seats ( some wear on the seats but no rips), head liner needs to be replaced, all the trim pieces.

complete doghouse w/ extra hood, driver fender, inner wheel wells, core support, new in the box gm head light bezals
4 doors (2 for each side) need some work
2 deck lids
taillights
blackout trime (some new in gm packages)
2 complete dash harnesses (one is for analog and one is for digital)
digital has twilight sentenial.
8.5 rearend
extra axles
southside bars
2 sets of a arms uppers and lowers
stock bore 109 block
couple sets of heads
engine harness
front and rear chrome bumpers
t wheels
2 ac units and ductwork
plus boxes of misc
basically everthing to build a rust free roller w/ a clean ohio title

i will try to post up some pics tomorrow. 4500.00 takes everthing i have and everthing is not listed thats just off the top of my head. i could probably put it on ebay and my more ,but i want it gone.

 

[tom robison]

i would like to sell this whole or most of it in one shot, if nothing happens in a few days i might start parting.

 

[tom robison]

 

[tom robison]

click on the pic for more off what is included

 

[transformer]

a few days yet?

Hello,
If you still have your project car, and are thinking about parting it out; I would like to request a few parts.
Driver door(no rust?), grill, grey interior parts (dont need dash, consol or seats- just all the rest), right rear black wheel molding, turbo hood, trunk deck with spoiler and extensions, and steering column. Thank you

 

[pitbullcrazyink]

pm sent

 

[tom robison]

i have decided to start parting out what i have, i am going to start a new thread thanks tom robison