87 wastegate using TM iC kit

[BuickTV6]

Hey guys. I knew this would come up soner or later. Using a stock appearing 84/85 housing to mount an 86/7 poston style wastegate. And of course, I can get the wastegate mounted, but not with the housing twisted to the front. Whats the easiest wat to get this waqstegate to work on things?? If anyone has any insight, it would be appreiated, thanks.

 

[BuickTV6]

Somebody! ANYBODY please!

 

[6 to go]

I used an 87 wastgate including the bracket and I still had to severly modify the bracket to get it to work right (have the right angle and not bind). This was probably the most frustrating part of the installation for me. Good luck.

 

[FJM568]

No easy way to do it...Just have to line it up and figure out how to bolt it down...may have to modify bolt holes on the wastegate actuator to line up right with the bolts on the compressor housing...Modify the wastegate actuator bracket only, not the turbo housing...WG actuator is a lot cheaper to replace in case of FU's...