9 Sec Parts

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

countrybumpkin

TurboBuick.Com Known SCAMMER
Joined
Apr 13, 2007
Messages
95
200 R4 BRUCE ROLLERIZED TRANSMISSION ALL BILLET INTERNALS 5 MILES ON TRANS// CHAMPION HEADS WITH ROLLER ROCKERS ALSO EXTRA RACE PORTING FROM TOM @ CHAMPION//CHAMPION INTAKE COMPLETE ALSO WITH RACE PORTING FROM CHAMPION TO MATCH HEADS//DLS STROKER KIT COMPLETE .30 JE PISTONS/RINGS/BEARINGS/RODS/PINS/JW FLYWHEEL AND BHJ BALANCER KIT IS INTERNAL BALANCED READY FOR BOLT IN//DLS ROLLER CAM BOLT IN NO MACHINE WORK TO BLOCK NEEDED TIMMING CHAIN AND GEARS ROLLER LIFTERS COMPLETE 520 LIFT// REASON FOR SELLING GOING TO STAGE 2 ALL PARTS ARE NEW AND NEVER USED ALL IN BOXES SELLING FOR DEALER COST NO MARK-UP (305) 725-2541 OR GENERATORSRUS124@YAHOO.COM
 
good Lord thats hard to read and you're yelling too. Break that up and put come prices on it and then I'll be able to tell if you have anything I could use/need.
 
How much for the DLS Roller Cam Kit? What are the specs on the cam? Does it include a timing set?
 
I was tempted to put some prices up for him :biggrin: , but this should help with being able to read this post:




200 R4 BRUCE ROLLERIZED TRANSMISSION ALL BILLET INTERNALS 5 MILES ON TRANS

CHAMPION HEADS WITH ROLLER ROCKERS ALSO EXTRA RACE PORTING FROM TOM @ CHAMPION

CHAMPION INTAKE COMPLETE ALSO WITH RACE PORTING FROM CHAMPION TO MATCH HEADS

DLS STROKER KIT COMPLETE .30 JE PISTONS

RINGS

BEARINGS

RODS

PINS

JW FLYWHEEL AND BHJ BALANCER KIT IS INTERNAL BALANCED READY FOR BOLT IN

DLS ROLLER CAM BOLT IN NO MACHINE WORK TO BLOCK NEEDED TIMMING CHAIN AND GEARS ROLLER LIFTERS COMPLETE 520 LIFT

REASON FOR SELLING GOING TO STAGE 2 ALL PARTS ARE NEW AND NEVER USED ALL IN BOXES SELLING FOR DEALER COST NO MARK-UP (305) 725-2541 OR GENERATORSRUS124@YAHOO.COM
 
Parts

Here Are The Prices
Trans 2,100 Shipped
Heads With Head Studs And Bee Hive Spring Upgrade 2,673 Shipped
Stroker Kit 2,978 Shipped
Roller Cam Kit 1,090 Shipped
Intake 1,000 Shipped


Hope This Helps I Paid About 700.00 More For Tax And Shipping I Will Eat This... All These Parts Were Purchased At Dealer Cost No Mark Up So I Dont Think You Can Beat These Prices..
 
What stage2 parts are you looking for? I would be interested in some trading- I have a complete stage2 motor.
 
Need Aluminum Oil Pan With P-up Need Headers And Some More Stuff That I Have Forgot Is Your Engine On Center Or Off Center
 
Tell me more about that intake. Is it complete with 70mm TB, coolant fittings... or is it just the standard ported champion off center intake?
 
Back
Top