mattcsn
Member
- Joined
- Nov 2, 2018
- Messages
- 96
Installed razors alky kit, everything went well and all seemed good. I drove it for maybe 30 minutes and the entire alky tank went dry. I have no leaks that I can find. I'll see if it runs dry sitting tonight to see if it possibly before the pump.
Regardless, I parked it and went back to it 20 minutes later. Now it will not spray during driving. Generally the light would indicate at around 5 psi and turn green. Now the light doesn't come on at all while driving and right before it should kick in, the car falls on its face.
The map is getting the required voltage and the test works in idle at setting 8. Goes red than green, but will not function while driving on its own. What could this be?
I tested using another 3 bar map and there was no change. I've checked the wiring/connections as well again.
Sent from my SM-N950U using Tapatalk
Regardless, I parked it and went back to it 20 minutes later. Now it will not spray during driving. Generally the light would indicate at around 5 psi and turn green. Now the light doesn't come on at all while driving and right before it should kick in, the car falls on its face.
The map is getting the required voltage and the test works in idle at setting 8. Goes red than green, but will not function while driving on its own. What could this be?
I tested using another 3 bar map and there was no change. I've checked the wiring/connections as well again.
Sent from my SM-N950U using Tapatalk