aluminum drums

[Dr.drivability]

would like a fairly unused set of aluminum brake drums and S-10 wheel cyls. thanks, Dave

 

[TURBOTWIN2]

I have a set, already machined. Thanks.
http://www.turbobuick.com/forums/parts-sale/247969-aluminum-drums-fuel-rail.html

 

[Dr.drivability]

I have a set, already machined. Thanks.
http://www.turbobuick.com/forums/parts-sale/247969-aluminum-drums-fuel-rail.html

Do you know what min spec is on these? Dave

 

[TURBOTWIN2]

Specs

Maximum diameter is 9.590". This pair after being turned, are under that, meaning still within specifications. They are 9.578" and 9.581", very close to even. They will not be able to be re-surfaced again. They are, however, good for a new brake job and should last tens of thousands of miles with a properly operating brake system. In millimeters, the maximum diameter is 243.5mm. These measure out to 243.36 and 243.28, about 1.5 to 2.0 millimeters of wear remaining. Thanks.

 

[brian]

PM sent....