Anybody running a PTC torque convertor?

[1987 Six Shooter]

What size bolts are you running? Bought a torque convertor from a fellow member and it didn't have bolts. M10x 1.5 don't tighten.Are they m10/x 1.25 or standard. Convertor is already in the car and I would hate to take it out. Any help would be appreciated.

 

[pacecarta]

PTC or protorque ...
ptc 9.5 from dusty uses 7/16-20bolts which usually requires drilling the flexplate holes larger
pro-torque 9.5 stamps PTC- in their part number ..they use m10 x 1.5 same as the stock D5 converter

 

[1987 Six Shooter]

Performance torque convertors in Alabama

 

[BMR]

7/16"-20 grade 8 bolts on both my 9.5" and 10" PTC converters.

 

[rag231]

Make sure it is spaced properly ( the info may on their website) and run some loctite, I prefer to use red ( some use blue) on them. I had a nut come off and it sounded like I had an engine knock when the others started to come loose.

 

[1987 Six Shooter]

Thank you, they ended up being 7/16 x 20.