ARP heads bolts, chromoly push rods for Hyd roller, adjustable push rods for flat tappet

[Steve]

I have some engine parts I would like to sell:

Used ARP head bolts for iron heads $30 shipped plus PayPal fees

New chromoly push rods for Hyd roller cam and iron heads 8.05 length. These are brand new. $55 shipped plus PayPal fees

Used adjustable pushrods for a flat tappet set up. These are great for getting proper preload on a car with stock non adjustable rockers. $35 shipped plus PayPal fees.

 

[Turbo V6 231]

pm sent on head bolts

 

[Steve]

Still for sale

 

[Ken Adams]

Interested in the push rods. What brand are they? Pics? Thanks

 

[Steve]

Interested in the push rods. What brand are they? Pics? Thanks

Which set?
The hyd roller pushrods are from Full Throttle and I think they are made by Comp Cams.

The adjustable pushrods came from Wicher Racing in FL but I am not sure of the brand.

 

[Ken Adams]

Sorry, push rods are for a Comp roller cam. Will these push rods be compatible with my Morel roller lifters, Harland Sharp roller rockers and stock heads? Thanks

 

[Steve]

Sorry, push rods are for a Comp roller cam. Will these push rods be compatible with my Morel roller lifters, Harland Sharp roller rockers and stock heads? Thanks

They should be perfect for your application. They came in a cam kit from Full Throttle with Morel lifters. My heads have been milled a good bit and I run a very thin head gasket so I went with a slightly shorter pushrod but these are the normal length for a iron headed motor with Morel lifters.

 

[Ken Adams]

They should be perfect for your application. They came in a cam kit from Full Throttle with Morel lifters. My heads have been milled a good bit and I run a very thin head gasket so I went with a slightly shorter pushrod but these are the normal length for a iron headed motor with Morel lifters.

pm sent

 

[Steve]

ARP head bolts sold

 

[Ken Adams]

Steve PM sent re payment

 

[turbo96max]

Did roller push rods sell?

 

[Steve]

Did roller push rods sell?

Yes, sale pending to Ken Adams. Thanks