ATR rear swaybar

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Savageite

Member
Joined
Jun 6, 2007
Messages
105
I'm looking for a ATR swaybar or the one from Fullthrottle. Let me know what you have.

Thanks.
 
I had the Full Throttle bar and it ripped the bushings out of my Metco lower trailing arms. Be careful when you install either one and use washers if necessary to space it correctly. The bar is heavy enough that it controls where the arms go. If it is too narrow then when you tighten it up, it pulls the arms in and screws up the bushings. I now run the HR bar and adjustable tubing lower arms with solid ends.

Just a little advise,
Coach
 
I have one,it's in like new condition with all the hardware,used it with my stock control arms but didn't fit my Metco control arms properly so went with the stock one for now if interested let me know.But I would go with H&R sway bar,it's a much better set-up,a little more money but I heard it's worth every penny.
 
Back
Top