Big Parts List!!!!!!!!!!!!!!!!!!

[jdpolzin]

Front cover with gears (stock assembly) ---- $40
Blackout Drivers front wheel well trim ---$40
Blackout door handles ------$15 set
Drivers front fender -------- $80 wont ship
Powermaster ------- $150
Main Accessories bracket ----- $65
Power steering pump ----- $40
Stock Alternator ------$50
Valve Covers ------- $30 set
Oil dipstick and tube ----------- $35
Tranny dipstick and tube ----- $35
86 ECM -------$65
Turbo Elbow ------- $20
Stock Chip ---------- $25
Radio surround -------- $25
Gauge surround ------ $30
Sail panels grey ------ $20 each
Lower T type door panels (grey) ------ $40 each
Bucket Seats (grey) -------- $150 set
Center counsel plate ------- $35
Rear window blackout trim ------- $30
Wndshield blackout trim -------- $35
Blackout Quarter windows ------ $50 each
Blackout tailights ----- $50 each
Gauge cluster -------- $60
Gn center caps New ---$20 Almost new -- $15
Stock fan Assembly ------ $80
Polished aluminum TA style turbo inlet bell --- $20
Stock cam (low miles) ------ $20
Underdrive Crank Pulley with polished aluminum center (NEW) -- $50
Billet Vac block (no extra port) ----- $25
Innercooler fans (2) ----- $30 each
Black Dash Cover (almost new) ------ $25
93 chip for blue tops (SP10B) ----- $25
Stock lower control arms ------- $30 set
Stock motor mounts -------- $40 pair
Big Mouth 4" aluminum pipe (for just before rubber 90) ----- $30
Stock Throttle body with TPS sensor and cable bracket ---- $65
Stock vacuum block ---- $10

All part are plus shipping. email me at jdpolzin@yahoo.com Take care!!!! ---Jeremy

 

[jdpolzin]

Ttt

 

[WINDMILL]

parts

any pic of the 4" big mouth pipe,interested. tell me more

 

[jdpolzin]

any pic of the 4" big mouth pipe,interested. tell me more

I dont have a pic but the pipe is a standard aluminum piece. It's the 4" pipe that goes just before the 90 deg elbow on the kit. Its got about a 45 deg bend. There is another pipe that goes between the turbo andthis pipe but i dont have one. It was only used for a month or so! Let me know!

 

[G-Force]

I am interested in the vacuum block! Any pics?

 

[jdpolzin]

I dont have a camera to take pics. Believe me i wish I did!! The vac block is as new polished aluminum.

 

[G-Force]

Is it the one that kirban carry or the slotted one that casper carries?

 

[jdpolzin]

Is it the one that kirban carry or the slotted one that casper carries?

No it's not slotted. It's like the Kirban one. I cant be sure that it came from Kirbans but it is just like it.

 

[GN Greg]

Email sent

 

[jdpolzin]

Blackout Drivers front wheel well trim ---$40
Blackout door handles ------$15 set
Drivers front fender -------- $80 wont ship
Powermaster ------- $150
Power steering pump ----- $40
Stock Alternator ------$50
Valve Covers ------- $30 set
Oil dipstick and tube ----------- $35
Tranny dipstick and tube ----- $35
86 ECM -------$65
Turbo Elbow ------- $20
Stock Chip ---------- $25
Radio surround -------- $25
Gauge surround ------ $30
Sail panels grey ------ $20 each
Lower T type door panels (grey) ------ $40 each
Bucket Seats (grey) -------- $150 set
Center counsel plate ------- $35
Rear window blackout trim ------- $30
Wndshield blackout trim -------- $35
Blackout Quarter windows ------ $50 each
Blackout tailights ----- $50 each
Gauge cluster -------- $60
Gn center caps New ---$20 Almost new -- $15
Stock fan Assembly ------ $80
Polished aluminum TA style turbo inlet bell --- $20
Stock cam (low miles) ------ $20
Underdrive Crank Pulley with polished aluminum center (NEW) -- $50
Billet Vac block (no extra port) ----- $25
Innercooler fans (2) ----- $30 each
Black Dash Cover (almost new) ------ $25
93 chip for blue tops (SP10B) ----- $25
Stock lower control arms ------- $30 set
Stock motor mounts -------- $40 pair
Big Mouth 4" aluminum pipe (for just before rubber 90) ----- $30
Door escutcheons --- $50 each
Black door straps ---- $10 each



Also have all the grey trim pieces, just ask about prices as you need them


All part are plus shipping. email me at jdpolzin@yahoo.com Take care!!!! ---Jeremy

 

[mikestertwo]

PM sent

 

[camaro75racer]

Very interested in the billet vacuum block. Do you take paypal? If so send me an email at camaro75_z28@yahoo.com

 

[jdpolzin]

Im sorry, i forgot to delete the billet vacuum block. It has been sold already. If there are any other parts that someone needs, let me know, I am parting an 86 T out!

 

[MDLost1@aol.com]

Curious about the gauge cluster. Digital / stock? 85mph top? I need to replace mine the Tach wont read right anymore.

 

[jdpolzin]

The gauge cluster is the stock one up to 85 mph. It is 70K on it!

 

[TURBOPOWERED68]

The gauge cluster is the stock one up to 85 mph. It is 70K on it!

you got mail

 

[TURBOPOWERED68]

The gauge cluster is the stock one up to 85 mph. It is 70K on it!

you have more mail

 

[jdpolzin]

Email replied to, thanks!

 

[TURBOPOWERED68]

great vender

parts recived no problems the cluster looks great I just hope everything works great
thanks dude
Dave

 

[jdpolzin]

Glad to help!