- Joined
- Jun 18, 2001
- Messages
- 1,485
I am planning to come to BG and have WAY to much stuff and need to make room. Contact me if you are looking for something I can not list everything here and I just took some random pics of stuff I have in storage. I have several motors and 200r4 transmissions. I do not have any Stage blocks at this time and I do not have any heads that don't come with a complete motor. I am negotiable on stuff so feel free to make an offer that is reasonable,.
Stuff that is a PIA to ship I can bring Bowling Green:
109 Short block, very nice block 3.810 bore billet caps on 2&3, DSS racing 2618 pistons, GN1 perf rods with P1 rods bolts stock length with .940 pins, 3.625 4340 crank. This is at the machine shop and I am willing to finish it and sell assembled block and rotating assembly. $5500.
I have everything to make a complete drop in motor, with iron heads stock intake all accessories brackets, wiring harness pieces parts etc. I have enough of this stuff to put together at least 2 complete 86-7 motor assemblies so if you are looking for anything under the hood LMK I have several of a lot of stuff.
I have a very nice girdled 109 long block minus an intake, GN1 heads with T&Ds. This motor has not been run since the refresh and was originally a DLS motor. It has been 9.20's in a full wt GN and made 800 rwhp with a 6870 PTE turbo which is also available. This is a complete setup with DLS billet oil pan and Duttwieler style oil pump, billet cam, diamond pistions, stocker cranks and rods etc. $14500
I have two sets of on-center wide journal rods, one Carrillo set $650 and one set of Olivers with NEW set of rod bolts, $650
I have at least one fully built Janis 200r4 new/fresh with no passes on them. $3800 no core required.
Body panels and parts: I have a new NOS GM passenger side quarter panel full size, 87 GN hood which is nice, a NOS Left front fender, NOS GN Bumpers plus a few nice ones that were powder coated, NOS GM rear bumper fillers still in the bags, I have a pair of doors from a 30k mile 87 GN that are decent and useable but not 100% rust free. I also have a lot of trim pieces many new GM, I am still putting an inventory together and will have a more detailed list this weekend.
I have one decent stock radiator and fan assembly and I have several fans and fan related parts.
I have multiple sets of stock headers with a few of them coming of very low mileage cars. One set is off 10k car and drivers header is NOT cracked/repaired and still has the heat shield. I have at least 2 sets with nice never repaired drivers headers that have cracks that can be repaired. I can sell these as is or we can repair the cracks and bead blast have them coated etc. LMK.
Stage 2 on-center intakes I have several $150 each. Stage 2 hub balancers I have 2 $50 ea,
Shifters, I aquired a collection of B&M Shifters,
I have the B&M Prostick out of my TSO car with the console plate and a line lock button $300. This is a really nice shifter and can be mounted in a stock console using the stock shifter base. Not included in the price but I also have all the linkage to make it work with the factory column for a TH400. I also have a crossmember for a TH400 swap.
www.summitracing.com
I have a BNIB B&M Hammer shifter that has never even been opened.
www.summitracing.com
I also have a new B&M Star Shifter that is also new but has been out of the box. $200 each.
www.summitracing.com
I have a complete set of NEW never mounted 16" R888r Toyo Proxies, 255 rear and 245 fronts, 2022 date codes. $450
I have a set of 16" GNX style Enkei wheels with centers and lugs and newer Goodyear eagle tires. They are mint almost new and I can delieve to the NATS $1000
Stuff that is a PIA to ship I can bring Bowling Green:
109 Short block, very nice block 3.810 bore billet caps on 2&3, DSS racing 2618 pistons, GN1 perf rods with P1 rods bolts stock length with .940 pins, 3.625 4340 crank. This is at the machine shop and I am willing to finish it and sell assembled block and rotating assembly. $5500.
I have everything to make a complete drop in motor, with iron heads stock intake all accessories brackets, wiring harness pieces parts etc. I have enough of this stuff to put together at least 2 complete 86-7 motor assemblies so if you are looking for anything under the hood LMK I have several of a lot of stuff.
I have a very nice girdled 109 long block minus an intake, GN1 heads with T&Ds. This motor has not been run since the refresh and was originally a DLS motor. It has been 9.20's in a full wt GN and made 800 rwhp with a 6870 PTE turbo which is also available. This is a complete setup with DLS billet oil pan and Duttwieler style oil pump, billet cam, diamond pistions, stocker cranks and rods etc. $14500
I have two sets of on-center wide journal rods, one Carrillo set $650 and one set of Olivers with NEW set of rod bolts, $650
I have at least one fully built Janis 200r4 new/fresh with no passes on them. $3800 no core required.
Body panels and parts: I have a new NOS GM passenger side quarter panel full size, 87 GN hood which is nice, a NOS Left front fender, NOS GN Bumpers plus a few nice ones that were powder coated, NOS GM rear bumper fillers still in the bags, I have a pair of doors from a 30k mile 87 GN that are decent and useable but not 100% rust free. I also have a lot of trim pieces many new GM, I am still putting an inventory together and will have a more detailed list this weekend.
I have one decent stock radiator and fan assembly and I have several fans and fan related parts.
I have multiple sets of stock headers with a few of them coming of very low mileage cars. One set is off 10k car and drivers header is NOT cracked/repaired and still has the heat shield. I have at least 2 sets with nice never repaired drivers headers that have cracks that can be repaired. I can sell these as is or we can repair the cracks and bead blast have them coated etc. LMK.
Stage 2 on-center intakes I have several $150 each. Stage 2 hub balancers I have 2 $50 ea,
Shifters, I aquired a collection of B&M Shifters,
I have the B&M Prostick out of my TSO car with the console plate and a line lock button $300. This is a really nice shifter and can be mounted in a stock console using the stock shifter base. Not included in the price but I also have all the linkage to make it work with the factory column for a TH400. I also have a crossmember for a TH400 swap.

B&M 80706 B&M Pro Stick Shifters | Summit Racing
Free Shipping - B&M Pro Stick Shifters with qualifying orders of $109. Shop Shifters, Automatic Transmission at Summit Racing.
I have a BNIB B&M Hammer shifter that has never even been opened.

B&M 80885 B&M Hammer Shifters | Summit Racing
Free Shipping - B&M Hammer Shifters with qualifying orders of $109. Shop Shifters, Automatic Transmission at Summit Racing.
I also have a new B&M Star Shifter that is also new but has been out of the box. $200 each.

Page Not Found
Get fast, Free Standard Shipping on orders over Summit Racing Equipment from $109 -- no shipping, handling, or rural fees! Exclusions apply.
I have a complete set of NEW never mounted 16" R888r Toyo Proxies, 255 rear and 245 fronts, 2022 date codes. $450
I have a set of 16" GNX style Enkei wheels with centers and lugs and newer Goodyear eagle tires. They are mint almost new and I can delieve to the NATS $1000