Champion Ported Irons

[blackshoebox]

Helping a friend sell theses, description is:

Champion CNC irons, with extra port work, and scorpion 1.65's. These heads have went 10.6@130+ with a Big shaft 64 turbo.

Heads are assembled, could probably use a valve job. All the parts + extra port work new would be $2500++.

Looking for $1500+shipping, firm.

PM or email me with questions.

-Alex

 

[blackshoebox]

 

[blackshoebox]

Offers??

 

[DragulaGN]

I would say that 1500 is kinda high for used Irons. I have 800 in mine with essentially the same set up. Just a little FYI

 

[blackshoebox]

I would say that 1500 is kinda high for used Irons. I have 800 in mine with essentially the same set up. Just a little FYI

So you got Champion ported Irons with 1.65 rockers for 800 bucks? Who did you rob?

Or have buick parts all of a sudden gotten very cheap?

 

[DragulaGN]

I have the ported irons withfresh valve job, new valves and springs for 800. No rockers
You can pick up used Scorpion rockers for about 250.

 

[86brick]

I have the ported irons withfresh valve job, new valves and springs for 800. No rockers
You can pick up used Scorpion rockers for about 250.

You didn't answer the question are these Champion CNC machine ported iron heads w/ extra work or a basic hand ported job from your cousin Vinny down the street?? Big difference...

 

[bison]

I have the ported irons withfresh valve job, new valves and springs for 800. No rockers
You can pick up used Scorpion rockers for about 250.

Start your own thread bro.

 

[DragulaGN]

Yes..these are Champion CNC heads. Excuse me for trying to help

And for what its worth..I just did a search and found a set of GN1's with valvcovers, stud kit, and Scorpion rockers for 1400.
http://www.turbobuick.com/forums/showthread.php?t=176202&highlight=Scorpion

 

[86brick]

Yes..these are Champion CNC heads. Excuse me for trying to help

And for what its worth..I just did a search and found a set of GN1's with valvcovers, stud kit, and Scorpion rockers for 1400.
http://www.turbobuick.com/forums/showthread.php?t=176202&highlight=Scorpion

Trying to help whom?? You are obviously not interested in buying these heads and your posts are worthless since he was asking for offers, not opinions on what he should sell things for... As bison said if you feel the need to voice your opinion on how somebody elses parts should be sold at least have the respect to start your own thread!

 

[86brick]

Atti2d

Oh yeah I just found a thread where you were interested in paying much more than $800 for a set of Champion CNC ported iron heads that Sully was selling....

http://www.turbobuick.com/forums/showthread.php?t=174194&highlight=heads

 

[DragulaGN]

 

[blackshoebox]

So anyone??

 

[JPN800]

CAN YOU E MAIL ME A PIC. SL5004ME@AOL.COM