Changing Alchy systems.- interim chip?

[Rayk]

My car will be without Alchy for a week or so while I remove my old SMC kit and install my new Razor kit. If I turn the boost down to say, 15 or 16 PSI can I safely run the Turbo Tweak alchy chip that's in the car now? It's the only chip i have for my 60 lb injectors.

 

[Razor]

My car will be without Alchy for a week or so while I remove my old SMC kit and install my new Razor kit. If I turn the boost down to say, 15 or 16 PSI can I safely run the Turbo Tweak alchy chip that's in the car now? It's the only chip i have for my 60 lb injectors.

May need to go way lower like 12-14 as the timing on the alky chip is higher

Or just keep your foot out till the other kit is on.

 

[Rayk]

May need to go way lower like 12-14 as the timing on the alky chip is higher

Or just keep your foot out till the other kit is on.

Thanks, Julio.

 

[3.8L V-8 eater]

Another thing to consider is that Eric adds a little more fuel in for the SMC kit than what he does a Razors kit..You may have to adjust your WOT fueling to compensate for this!!!

 

[Rayk]

Another thing to consider is that Eric adds a little more fuel in for the SMC kit than what he does a Razors kit..You may have to adjust your WOT fueling to compensate for this!!!

Thanks much for that tip.

 

[QUIP'6']

lower timing to 20/18 and boost to 14 or 15 and add 10% wot fuel in chip.