I'm selling a chrome up pipe for $60. The pipe has a nozzle hole (roughly 3/8") drilled on the intercooler (lower) side if the pipe. I did test fit the nozzle that came with the Alkycontrol kit and the hole appears to be the correct size. I purchased it used about five years ago. I recently installed Razor's kit so I didn't use this pipe because of the location of the nozzle hole due to potential siphoning. There is a small scuff mark about a 1/2 inch long on the underside at the throttle body end. The pipe comes with two hose connectors.
![IMG_20130928_154251.JPG IMG_20130928_154251.JPG](https://turbobuick-data.community.forum/attachments/177/177464-074f389a794967e8c3dad67edaf15064.jpg)
![IMG_20130928_154332.JPG IMG_20130928_154332.JPG](https://turbobuick-data.community.forum/attachments/177/177465-f59815fa9d006fe7d2e4b01e79859ae6.jpg)
![IMG_20130928_154341.JPG IMG_20130928_154341.JPG](https://turbobuick-data.community.forum/attachments/177/177466-0ee0a6007f93469c4d0c0fd216caf991.jpg)
![IMG_20130928_154425.JPG IMG_20130928_154425.JPG](https://turbobuick-data.community.forum/attachments/177/177467-2bfbc530437a23b8212ccf482473dc7d.jpg)
![IMG_20130928_154251.JPG IMG_20130928_154251.JPG](https://turbobuick-data.community.forum/attachments/177/177464-074f389a794967e8c3dad67edaf15064.jpg)
![IMG_20130928_154332.JPG IMG_20130928_154332.JPG](https://turbobuick-data.community.forum/attachments/177/177465-f59815fa9d006fe7d2e4b01e79859ae6.jpg)
![IMG_20130928_154341.JPG IMG_20130928_154341.JPG](https://turbobuick-data.community.forum/attachments/177/177466-0ee0a6007f93469c4d0c0fd216caf991.jpg)
![IMG_20130928_154425.JPG IMG_20130928_154425.JPG](https://turbobuick-data.community.forum/attachments/177/177467-2bfbc530437a23b8212ccf482473dc7d.jpg)