Classic Industries wheel backspacing question

[GSX-PKV]

Does anyone know what is the backspacing is on the 16" GNX style wheels Classic Industries sells? Thanks!

 

[DR BOOST]

4"

 

[stickybones]

If they are front wheels with zero offset, the backspacing would be 4.5".

 

[GSX-PKV]

Thanks, I'm planning on using those to mount 275x55x16 M&H tires and was wondering if they would have any rubbing issues but with them on the frame. I used to run 275x60x15 MT's on an 8", 3 1/2" offset 15" wheel so that extra 1/2-1" backspacing should be good.... I hope

 

[stickybones]

You do know that the "extra" backspacing of the GTA rim is going to put the wheel CLOSER to the frame don't you?

 

[GSX-PKV]

good point!

 

[Shwab]

good point!

ive got 255/50r16 MT on mine and can only squeeze my fingers back there .... i have herd that MT tires are alot wider than M&H tires though

 

[GSX-PKV]

ive got 255/50r16 MT on mine and can only squeeze my fingers back there .... i have herd that MT tires are alot wider than M&H tires though

Thanks! Do you have aluminum brake drums?

 

[Shwab]

Thanks! Do you have aluminum brake drums?

yep